IL WTB 68 Panel/Suburban gas filler and marker light body cut - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68PanelTruck · 11-29-2020, 11:58 AM

Hi guys,
I'm looking for a 68 panel truck/Suburban driver side rear quarter section that has the gas filler hole and marker light area. I prefer to have one rust free piece with both holes as they are close together. A piece that goes from the horizontal body line behind the rear wheel and up 10 inches above the gas filler hole (total of around 16") would be great. I don't need the taillight but it's ok if it is part of the cut. I'm near Chicago and can drive 400 miles or have it shipped (prefer).
This might help show what I need:

Madkidd007 · 11-29-2020, 12:38 PM

Just sayin

68PanelTruck · 11-29-2020, 06:00 PM

I saw that but I think it's a little too far. I checked it out and it is over 700 miles

That's the problem with living in the rusty Midwest, everything local is rusted out and all the good parts are down south or out west

After doing some work on my truck today I found some frame damage due to rust. The area above the rear coil springs is rusted away and kinda collapsing. It is also very thin from the gas tank and back. I really need to find someone cutting up a frame. I can use the back half of the frame from the crossmember where the truck arms connect, all the way back to the rear bumper. That would solve a lot of problems.

68PanelTruck · 12-09-2020, 08:16 PM

Good news. I found a rear quarter so I'm all set. Thanks

11-29-2020, 11:58 AM	#1
68PanelTruck Registered User Join Date: Aug 2020 Location: Frankfort, Ill Posts: 143	WTB 68 Panel/Suburban gas filler and marker light body cut Hi guys, I'm looking for a 68 panel truck/Suburban driver side rear quarter section that has the gas filler hole and marker light area. I prefer to have one rust free piece with both holes as they are close together. A piece that goes from the horizontal body line behind the rear wheel and up 10 inches above the gas filler hole (total of around 16") would be great. I don't need the taillight but it's ok if it is part of the cut. I'm near Chicago and can drive 400 miles or have it shipped (prefer). This might help show what I need: Attached Images __________________ It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust.

11-29-2020, 12:38 PM	#2
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,238	Re: WTB 68 Panel/Suburban gas filler and marker light body cut Just sayin Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

11-29-2020, 06:00 PM	#3
68PanelTruck Registered User Join Date: Aug 2020 Location: Frankfort, Ill Posts: 143	Re: WTB 68 Panel/Suburban gas filler and marker light body cut I saw that but I think it's a little too far. I checked it out and it is over 700 miles That's the problem with living in the rusty Midwest, everything local is rusted out and all the good parts are down south or out west After doing some work on my truck today I found some frame damage due to rust. The area above the rear coil springs is rusted away and kinda collapsing. It is also very thin from the gas tank and back. I really need to find someone cutting up a frame. I can use the back half of the frame from the crossmember where the truck arms connect, all the way back to the rear bumper. That would solve a lot of problems. __________________ It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust.

12-09-2020, 08:16 PM	#4
68PanelTruck Registered User Join Date: Aug 2020 Location: Frankfort, Ill Posts: 143	Re: WTB 68 Panel/Suburban gas filler and marker light body cut Good news. I found a rear quarter so I'm all set. Thanks __________________ It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.