The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-08-2021, 10:17 AM   #1
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Steering column choice for 57

Hi, Doing a 57 pickup with C4 suspension. What is everyone using for aftermarket steering columns? I have read the cheaper ones are dangerous as the internals are weak. It has a 31" chevy van column in it now but what somthing cleaner looking. Looking to get somthing soon as I am mocking up everything on the truck now. Thanks Steve
57FleetsideC4 is online now   Reply With Quote
Old 01-08-2021, 10:28 AM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: Steering column choice for 57

ididit makes some nice stuff
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 01-08-2021, 11:47 AM   #3
DPete
Registered User
 
DPete's Avatar
 
Join Date: Dec 2016
Location: Farmington, Ca.
Posts: 151
Re: Steering column choice for 57

Quote:
Originally Posted by mongocanfly View Post
ididit makes some nice stuff
That's what I have, has tilt & emergency flashers, soild construction
__________________
56' 3100 shortbed
DPete is offline   Reply With Quote
Old 01-08-2021, 12:43 PM   #4
svr
Registered User
 
svr's Avatar
 
Join Date: Feb 2016
Location: Othello washington
Posts: 400
Re: Steering column choice for 57

I used a late '70's floor shift pu column, tilt, turn signals and flashers. I shaved the key switch and lock. i'ts a bit long but works good. Got it for $50 and spent a bit on new signal switch and bottom bushings making it new.
__________________
57 short box, 235, T5, C4
http://67-72chevytrucks.com/vboard/s...d.php?t=739132
svr is offline   Reply With Quote
Old 01-08-2021, 01:01 PM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
Re: Steering column choice for 57

Ididit or Flaming River if you want clean aftermarket.

I've known a couple of guys who bought the cheap aftermarket ones and ended up replacing them in a short period because they got loose and there was no way to tighten them back up as there is on a GM factory column. You can go into a factory GM column and tighten it up if it is a bit sloppy. My wife is terrible for using the steering wheel to pull her self forward to reach the key or do what ever and I was always having to go into them an tigten them up.

I wish someone in the aftermarket would sell a collar/body that was minus the key switch to replace the one on a 70's Chevy truck tilt column. That piece if it were high quality would let you buy a wrecking yard column and make a real clean column out of it.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 01-08-2021, 01:18 PM   #6
regan56
Registered User
 
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
Re: Steering column choice for 57

Following this thread.
regan56 is offline   Reply With Quote
Old 01-08-2021, 03:30 PM   #7
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

GM makes some nice stuff
Attached Images
 
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-08-2021, 05:23 PM   #8
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Re: Steering column choice for 57

Thanks for the input guys. I have been looking at the ididit and flaming river columns and they look nice. It's hard to see the difference between a $300 column and a $1000 column. If its saftey it would be cheap insurance to get the ididit,flaming river. Steve
57FleetsideC4 is online now   Reply With Quote
Old 01-08-2021, 08:37 PM   #9
regan56
Registered User
 
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post
GM makes some nice stuff
What vehicle is that out of? I do like the looks of it
regan56 is offline   Reply With Quote
Old 01-09-2021, 05:32 PM   #10
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post
GM makes some nice stuff
Nice!

Love the interior. I'm contemplating options now for a console and runner along the bottom of the dash for A/C vents.
87Lowrider is offline   Reply With Quote
Old 01-10-2021, 06:23 PM   #11
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

Quote:
Originally Posted by 57FleetsideC4 View Post
Thanks for the input guys. I have been looking at the ididit and flaming river columns and they look nice. It's hard to see the difference between a $300 column and a $1000 column. If its saftey it would be cheap insurance to get the ididit,flaming river. Steve
it's definitely safety related. the cheap columns are know to break at the tilt column joint and send the vehicle in the ditch or across the center line. i'll let dsraven post the link, i'm not seeing it now

gm spent millions and years of engineering to perfect the steering column
my column came out of an 86 gmc safari minivan, same van as the astro
it's pre-airbag with tilt, turn, key on column and hi/lo dimmer
you do need to cover up the bottom if you worry about fugly
i used the van steering wheel, always meant to put on a classic wheel, but i like it

nicest thing? IT COST ME $35
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-10-2021, 06:32 PM   #12
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

Quote:
Originally Posted by 87Lowrider View Post
Nice!

Love the interior. I'm contemplating options now for a console and runner along the bottom of the dash for A/C vents.
check out my build.
lots of pics and info on my dash fascia/console/sub enclosure
i learned fiberglass on this truk
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-11-2021, 12:56 PM   #13
regan56
Registered User
 
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post

gm spent millions and years of engineering to perfect the steering column
my column came out of an 86 gmc safari minivan, same van as the astro
it's pre-airbag with tilt, turn, key on column and hi/lo dimmer
you do need to cover up the bottom if you worry about fugly
i used the van steering wheel, always meant to put on a classic wheel, but i like it

nicest thing? IT COST ME $35
I have been looking for a nice GM column and this one fits most bills. I may have to rethink, i was looking for a column with the external PRND(O)L display for my 700R4, probably available in a older GM van though too.
regan56 is offline   Reply With Quote
Old 01-11-2021, 02:48 PM   #14
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

the length of the astro column was just right
the astro is a 3 speed with the wire pull for PRNDLL, i used a stick on PRNDLLL from ididit
the shift lever is on the left side, makes for lots of room to work, but you gotta reverse the shift
i did this with an intermediate shaft, this shaft also changed the 3spd into a 4 spd
i added pics that show the fugly and the mount
Attached Images
    
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-12-2021, 04:50 PM   #15
SCHRUMGMC
Registered User
 
SCHRUMGMC's Avatar
 
Join Date: Dec 2012
Location: North Carolina
Posts: 4,989
Re: Steering column choice for 57

I like the way the IDIDIT columns look and I am getting another column here soon

Mine will be painted and matched to make it look like it was made for that truck(originally)
__________________
1971 GMC Sierra
1959 GMC 100
SCHRUMGMC is offline   Reply With Quote
Old 01-12-2021, 05:48 PM   #16
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

unless your made of money, the $35 jy column makes sense, schrumgmc
you can always change it out later as they wire up with the same plugs
a 28" paintable ididit tilt column is over $700
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-12-2021, 08:38 PM   #17
SCHRUMGMC
Registered User
 
SCHRUMGMC's Avatar
 
Join Date: Dec 2012
Location: North Carolina
Posts: 4,989
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post
unless your made of money, the $35 jy column makes sense, schrumgmc
you can always change it out later as they wire up with the same plugs
a 28" paintable ididit tilt column is over $700
Yeah the column I’m getting is $864 out the door... pretty expensive

It’s all in what you like I guess.
__________________
1971 GMC Sierra
1959 GMC 100
SCHRUMGMC is offline   Reply With Quote
Old 01-13-2021, 10:37 AM   #18
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Re: Steering column choice for 57

Lots of great suggestions here. What is the typical length is everyone using? The column that came with the truck was a 89 chevy van and the lower shift lever is on the opposite side so getting the linkage on will be tough. The length is 31" and am thinking 28" or 30". Steve
57FleetsideC4 is online now   Reply With Quote
Old 01-31-2021, 12:14 PM   #19
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Re: Steering column choice for 57

I have a follow up column question. I got the original bench seat and the steering column in. It has a CPP brake booster/pedal relocation kit already installed. The problem is with the column in the straight position by the time I reach the brake pedal my knee is against the bottom of the steering wheel. the column is a 89 chevy van and is 31". I am getting a new column so would it work to get a 33" column to get the wheel out further? The pic shows what I am talking about. Steve
Attached Images
 
__________________
My 57 Fleetside C4 build. http://67-72chevytrucks.com/vboard/s...d.php?t=817054
57FleetsideC4 is online now   Reply With Quote
Old 01-31-2021, 02:51 PM   #20
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

change out your column mount to have the column almost touching the dash
i'm 6'4" and raised the drivers seat 2" over the bench height to give me more leg room
i have the plastic column trim 1/4" away from the dash,
didn't realize i messed up until the speedo went in
i had to grind the point off my cluster trim ring

it works, it also looks like my wheel is higher than yours
i typically run the column tilt straight
Attached Images
  
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-31-2021, 06:25 PM   #21
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post
change out your column mount to have the column almost touching the dash
i'm 6'4" and raised the drivers seat 2" over the bench height to give me more leg room
i have the plastic column trim 1/4" away from the dash,
didn't realize i messed up until the speedo went in
i had to grind the point off my cluster trim ring

it works, it also looks like my wheel is higher than yours
i typically run the column tilt straight
Thank You. Trying to figure this stuff out before I disassemble for body work. Yours does look higher up than mine. Steve
__________________
My 57 Fleetside C4 build. http://67-72chevytrucks.com/vboard/s...d.php?t=817054
57FleetsideC4 is online now   Reply With Quote
Old 02-01-2021, 03:25 PM   #22
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

hard to tell with that very iffy pic you posted
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 02-01-2021, 05:23 PM   #23
57FleetsideC4
Registered User
 
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 484
Re: Steering column choice for 57

Quote:
Originally Posted by _Ogre View Post
hard to tell with that very iffy pic you posted
Ogre, Here are some more pics. My original pic was to show how my leg would go up against the steering wheel if I tried to use the brake. Thanks Steve
Attached Images
   
__________________
My 57 Fleetside C4 build. http://67-72chevytrucks.com/vboard/s...d.php?t=817054
57FleetsideC4 is online now   Reply With Quote
Old 02-02-2021, 02:05 PM   #24
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

your column is a little higher on the floor and a little lower on the dash vs truk
just a little here and there obviously makes a lot of difference
not sure if your steering is locked in yet, now would be the time to fix the column layout
maybe moving the bottom down an inch would make all the difference
Attached Images
 
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 02-02-2021, 02:08 PM   #25
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: Steering column choice for 57

i think our columns are the same height just not the same angle

maybe these will help
Attached Images
  
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com