8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TWISTED METAL GARAGE** · 06-14-2021, 11:09 AM

I have a factory rear end out of a 2001 blazer 2wd 5spd

3.42 ratio 8.5 gears disc brake complete setup nothing will be cut it is still in the blazer i will sell rear end for $600 local pickup in GREENEVILLE TN OR I CAN MEET YOU IN EAST TN AERA SOMEWHERE

VERY HARD TO FIND THESE ANYMORE WILL FIT ANY S10 PICKUP OR BLAZER NICE FOR A V8 SWAP

ALSO HAVE SEVERAL SETS OF FRONT ZQ8 BLAZER SPINDLES DUAL PISTON CALIPERS $150 A PAIR YOU CAN BOLT C5 CORVETTE BRAKES TO THEM WITH A KIT OFF EBAY

**Warrens69GMC** · 09-14-2021, 10:33 PM

wish you were closer

95 S_Trucker · 09-15-2021, 02:07 PM

Is the Rear Axle out of a 2wd, 4wd, or ZR2? All have different widths. Thanks.

**Warrens69GMC** · 09-15-2021, 02:23 PM

Quote:

Originally Posted by TWISTED METAL GARAGE

I have a factory rear end out of a 2001 blazer 2wd 5spd

3.42 ratio 8.5 gears disc brake complete setup nothing will be cut it is still in the blazer

Looks to be a 2wd blazer

colgad · 09-20-2021, 09:28 PM

Quote:

Originally Posted by TWISTED METAL GARAGE

I have a factory rear end out of a 2001 blazer 2wd 5spd

3.42 ratio 8.5 gears disc brake complete setup nothing will be cut it is still in the blazer i will sell rear end for $600 local pickup in GREENEVILLE TN OR I CAN MEET YOU IN EAST TN AERA SOMEWHERE

VERY HARD TO FIND THESE ANYMORE WILL FIT ANY S10 PICKUP OR BLAZER NICE FOR A V8 SWAP

ALSO HAVE SEVERAL SETS OF FRONT ZQ8 BLAZER SPINDLES DUAL PISTON CALIPERS $150 A PAIR YOU CAN BOLT C5 CORVETTE BRAKES TO THEM WITH A KIT OFF EBAY

Will you ship the spindles / calipers or is it only local pickup

Thanks
Dave

**TWISTED METAL GARAGE** · 06-10-2022, 09:29 PM

Sorry but i have been working alot and staying to busy at my shop

I have 3 2001 blazer 2dr 2wd 5speed decent mile 8.5 disc brake rear ends that are extra stuff i wont need right now will take $500 each 8.5 disc brake rear end complete 1 is out ready to go with recent new rear calipers on it and its a 3.42 G80 unit too

Located in GreenEville TN 37745 pm me for the Phone number call or perfer a text very busy and have phone close by to me Thank you

I still have a few set of the spindles also can possible ship but i would need a zip code to get a quote and probally 2 boxes due to the weight unless shipped with out the rotors but with the calipers

**TWISTED METAL GARAGE** · 06-10-2022, 09:33 PM

Rear end is 2wd and is 48 inches inside backing plate to backing plate
and 54.5 inches from wheel mounting surface to wheel mounting surface

**special-K** · 09-13-2023, 08:45 AM

I know this is over a year old. But if you see this post and still have the parts I am interested in a rear and spindles

IIGW · 10-17-2023, 02:32 PM

Quote:

Originally Posted by TWISTED METAL GARAGE

Rear end is 2wd and is 48 inches inside backing

Quote:

Originally Posted by special-K

I know this is over a year old.

sometimes quoting the person tags them so they know a new post has been made

**special-K** · 11-02-2023, 08:07 AM

Thanks, didn't think of that. I always send a PM because the notice is the first thing you see. I'd run down there are pick up parts as soon as I could pack up if there were available

bL.A.zer90045 · 12-02-2023, 12:17 PM

I have 5 of these rearend complete and matching front spindles,calipers, etc.(gbody guy)---if you can afford the shipping (approx 2-300) I'd price the rears at 400.00 and include the spindles for free.located in the rust free and gm plentiful southwest indian territory-northern NM.

**special-K** · 12-16-2023, 09:28 AM

Hmmm... Just to have the option as I consider this, could you PM me some contact info? Thanks

The thing with this stuff in TN is I can run down and get it

Madkidd007 · 12-16-2023, 09:06 PM

Quote:

Originally Posted by special-K

Hmmm... Just to have the option as I consider this, could you PM me some contact info? Thanks

The thing with this stuff in TN is I can run down and get it

Car-part.com is your friend. And fyi all 98-04 blazer spindles are the same. Only difference is 2wd or 4wd

**special-K** · 12-23-2023, 09:00 AM

Quote:

Originally Posted by Madkidd007

Car-part.com is your friend. And fyi all 98-04 blazer spindles are the same. Only difference is 2wd or 4wd

Thanks

06-14-2021, 11:09 AM	#1
TWISTED METAL GARAGE Junior Member Join Date: Jun 2021 Location: greeneville tennessee Posts: 35	8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES I have a factory rear end out of a 2001 blazer 2wd 5spd 3.42 ratio 8.5 gears disc brake complete setup nothing will be cut it is still in the blazer i will sell rear end for $600 local pickup in GREENEVILLE TN OR I CAN MEET YOU IN EAST TN AERA SOMEWHERE VERY HARD TO FIND THESE ANYMORE WILL FIT ANY S10 PICKUP OR BLAZER NICE FOR A V8 SWAP ALSO HAVE SEVERAL SETS OF FRONT ZQ8 BLAZER SPINDLES DUAL PISTON CALIPERS $150 A PAIR YOU CAN BOLT C5 CORVETTE BRAKES TO THEM WITH A KIT OFF EBAY __________________ TWISTED METAL GARAGE GREENEVILLE TN 1972 2WD BLAZER 1970 4X4 BLAZER 1971 C10 SHORTBED 1969 K30 DUMP TRUCK 2001 XTREME BLAZER CUSTOM 2007 BUICK RAINIER 6.2 GS 2WD I CAN DO SOME LS TUNING I HAVE HP TUNERS

09-14-2021, 10:33 PM	#2
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,622	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES wish you were closer __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

09-15-2021, 02:07 PM	#3
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES Is the Rear Axle out of a 2wd, 4wd, or ZR2? All have different widths. Thanks.

06-10-2022, 09:29 PM	#6
TWISTED METAL GARAGE Junior Member Join Date: Jun 2021 Location: greeneville tennessee Posts: 35	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES Sorry but i have been working alot and staying to busy at my shop I have 3 2001 blazer 2dr 2wd 5speed decent mile 8.5 disc brake rear ends that are extra stuff i wont need right now will take $500 each 8.5 disc brake rear end complete 1 is out ready to go with recent new rear calipers on it and its a 3.42 G80 unit too Located in GreenEville TN 37745 pm me for the Phone number call or perfer a text very busy and have phone close by to me Thank you I still have a few set of the spindles also can possible ship but i would need a zip code to get a quote and probally 2 boxes due to the weight unless shipped with out the rotors but with the calipers __________________ TWISTED METAL GARAGE GREENEVILLE TN 1972 2WD BLAZER 1970 4X4 BLAZER 1971 C10 SHORTBED 1969 K30 DUMP TRUCK 2001 XTREME BLAZER CUSTOM 2007 BUICK RAINIER 6.2 GS 2WD I CAN DO SOME LS TUNING I HAVE HP TUNERS

06-10-2022, 09:33 PM	#7
TWISTED METAL GARAGE Junior Member Join Date: Jun 2021 Location: greeneville tennessee Posts: 35	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES Rear end is 2wd and is 48 inches inside backing plate to backing plate and 54.5 inches from wheel mounting surface to wheel mounting surface __________________ TWISTED METAL GARAGE GREENEVILLE TN 1972 2WD BLAZER 1970 4X4 BLAZER 1971 C10 SHORTBED 1969 K30 DUMP TRUCK 2001 XTREME BLAZER CUSTOM 2007 BUICK RAINIER 6.2 GS 2WD I CAN DO SOME LS TUNING I HAVE HP TUNERS

09-13-2023, 08:45 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES I know this is over a year old. But if you see this post and still have the parts I am interested in a rear and spindles __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-02-2023, 08:07 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES Thanks, didn't think of that. I always send a PM because the notice is the first thing you see. I'd run down there are pick up parts as soon as I could pack up if there were available __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-02-2023, 12:17 PM	#11
bL.A.zer90045 Registered User Join Date: May 2012 Location: 90045 cali Posts: 568	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES I have 5 of these rearend complete and matching front spindles,calipers, etc.(gbody guy)---if you can afford the shipping (approx 2-300) I'd price the rears at 400.00 and include the spindles for free.located in the rust free and gm plentiful southwest indian territory-northern NM.

12-16-2023, 09:28 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 8.5 disc brake 3.42 rear end 2wd ZQ8 SPINDLES Hmmm... Just to have the option as I consider this, could you PM me some contact info? Thanks The thing with this stuff in TN is I can run down and get it __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.