66 C10 Stepside Remote Fill Ideas Wanted

[Afirehawk1]

I have my Boyd tank installed in the rear
I dont want to come up through the bed floor

Any ideas installing the fill on the bed fender??
Posted via Mobile Device

[LostMy65]

There are a couple cool threads on this.
I'll see if can find one.

[LostMy65]

http://67-72chevytrucks.com/vboard/s...d.php?t=765224

https://67-72chevytrucks.com/vboard/...d.php?t=732404

http://67-72chevytrucks.com/vboard/s...d.php?t=576943

[cwcarpenter98]

If I decide to move my tank to under the bed, I plan on using a 60-66 suburban or panel filler neck and fuel door in the bedside. Welding and body work definitely involved with that idea though

[Afirehawk1]

I found this filler neck and cap
1.5 inch filler neck
I could go on the fender top with a 2.5 inch diameter footprint.
I could bend and weld some aluminum hard pipe from this filler neck and trail beneath the fender well then 90 over with a 1.5x2 reducer fuel hose and then connect to the fuel tank filler pipe which on mine is directed towards the bed side

Looks this may be a clean install and abit custom.

Thoughts?

[LostMy65]

Originally Posted by Afirehawk1

I found this filler neck and cap
2 inch with a 1.5 inch filler neck
I could go on the fender top with a 1.75 x 2.5 footprint
I could bend some aluminum hard pipe from this filler neck and trailer beneath the fender well then 90 over with a 1.5x2 reducer fuel hose and then connect to the fuel tank filler pipe which on mine is directed towards the bed side

Looks this may be a clean install and abit custom.

Thoughts?

I think that placed in the correct spot would look spectacular. And no welding required.

[cwcarpenter98]

Sorry, my suggestion earlier probably won't work too well on the stepside fenders. Should have read the title a little clearer.

Here is what Roll_the_dice did for his stepside: http://67-72chevytrucks.com/vboard/s...&postcount=327

[MT65]

Originally Posted by Afirehawk1

I have my Boyd tank installed in the rear
I dont want to come up through the bed floor

Any ideas installing the fill on the bed fender??
Posted via Mobile Device

I have found only 2 limiting factors in building cars and truck,
1–creativity
2 — wallet size
Remember you are building this to please yourself, the rest are just lookers😉😉😉

[The Rocknrod]

Originally Posted by cwcarpenter98

Sorry, my suggestion earlier probably won't work too well on the stepside fenders. Should have read the title a little clearer.

Here is what Roll_the_dice did for his stepside: http://67-72chevytrucks.com/vboard/s...&postcount=327

I was thinking about doing that with a fill grommet and a GM script locking gas cap.