55.2-59 Stock overload spring bump stop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iceman4 · 12-22-2021, 08:58 PM

These are on my 57. Would these be original? Attachment 2153507

**mr48chev** · 12-22-2021, 10:39 PM

I'd say not original. Probably something that was sold by parts houses or Western Auto back in the day.

_Ogre · 12-23-2021, 08:30 PM

definitely not original. mine were riveted to the bottom of the frame like this

iceman4 · 12-23-2021, 11:42 PM

Ok, Thanks. I thought it looked too hokie to be factory. No doubt it was done in the distant past, probably when the 10 bolt rear and 54 chevy car hubs were added to get the 5 lug bolt pattern.

dsraven · 12-24-2021, 05:44 PM

you may also find something usable in here if you have time.
https://www.trifive.com/d1/55-59Assy.pdf
my 3/4 ton came with overloads but the springs were another set of shorter leaf springs above the original springs with a spacer block between them and some contact slipper brackets riveted onto the frame above that. similar to what you would find on a newer truck but minus the teflon contact slippers.

**dennislbrooks** · 01-03-2022, 07:19 AM

I kinda like the engineering of that overload.

12-22-2021, 08:58 PM	#1
iceman4 Registered User Join Date: Jan 2016 Location: Pennsylvania Posts: 54	Stock overload spring bump stop These are on my 57. Would these be original? Attachment 2153507 Attached Images Last edited by Rickysnickers; 12-23-2021 at 10:30 AM.

12-22-2021, 10:39 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Stock overload spring bump stop I'd say not original. Probably something that was sold by parts houses or Western Auto back in the day. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

12-23-2021, 08:30 PM	#3
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Stock overload spring bump stop definitely not original. mine were riveted to the bottom of the frame like this __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

12-23-2021, 11:42 PM	#4
iceman4 Registered User Join Date: Jan 2016 Location: Pennsylvania Posts: 54	Re: Stock overload spring bump stop Ok, Thanks. I thought it looked too hokie to be factory. No doubt it was done in the distant past, probably when the 10 bolt rear and 54 chevy car hubs were added to get the 5 lug bolt pattern.

12-24-2021, 05:44 PM	#5
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,372	Re: Stock overload spring bump stop you may also find something usable in here if you have time. https://www.trifive.com/d1/55-59Assy.pdf my 3/4 ton came with overloads but the springs were another set of shorter leaf springs above the original springs with a spacer block between them and some contact slipper brackets riveted onto the frame above that. similar to what you would find on a newer truck but minus the teflon contact slippers.

01-03-2022, 07:19 AM	#6
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: Stock overload spring bump stop I kinda like the engineering of that overload. __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.