The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-14-2022, 02:39 PM   #1
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

All,

I'm getting set to do the PS swap into my 66 C10 using Captain Fabs bracket. Looking on ebay for "SBC Short water pump Power Steering Bracket", I see at least a half dozen different options. Would prefer to run a factory GM bracket vs a universal aftermarket one...

The details of the truck:
New SBC 350 crate engine
Short Water Pump
Alternator mounted on Drivers side high mount.

Does anyone have a list of Part Numbers, that they used that worked? Looking for the following:

Pump Bracket
Pump
Pump Pulley

and less urgently:
Crank Pulley
Waterpump pulley
Alternator Pulley

Thanks!
Bushman66 is offline   Reply With Quote
Old 02-14-2022, 03:36 PM   #2
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Yes, I'm using Alan Grove and they line up perfectly.
http://www.alangrovecomponents.com/S...Short_Pump.htm
132R - A.C.
232L - Alt.
400L - P.S.
Attached Images
  
The Rocknrod is offline   Reply With Quote
Old 02-14-2022, 04:52 PM   #3
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Thanks RocknRod!! I called Alan Grove, those guys know their stuff. Ordered the bracket, crank pulley and pump pulley! Much easier!
Bushman66 is offline   Reply With Quote
Old 02-15-2022, 05:59 PM   #4
UK62LW
Registered User
 
UK62LW's Avatar
 
Join Date: Aug 2011
Location: Bury St Edmunds, UK
Posts: 215
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

I used the AG low brackets (LWP) but had the misfortune to have the wrong style pump, so ended up like this:

A new pump with the correct mounting configuration sorted it, and it was all detailed in their literature so was an easy fix.



__________________
Barney, in the UK

1962 Chevy C20
1974 Ford Econoline
1987 Peugeot 205 GTi
1991 Peugeot 205 GTi
UK62LW is offline   Reply With Quote
Old 02-15-2022, 11:12 PM   #5
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,776
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Guess I'm a little late,, but for the record here is my experience with the Borgeson P/S pump bracket.
https://67-72chevytrucks.com/vboard/...d.php?t=830026
AcampoDave is offline   Reply With Quote
Old 02-16-2022, 11:26 AM   #6
MikeN
Registered User
 
MikeN's Avatar
 
Join Date: Oct 2007
Location: Marietta, GA
Posts: 805
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

You'll be happy with the Alan Grove stuff. I have their power steering brackets on both my 64 C10 and my 65 Impala.

On both vehicles, the power steering belt runs VERY close to one of the brackets, but it has never caused any issue and I drive my vehicles quite a bit.
MikeN is offline   Reply With Quote
Old 02-16-2022, 12:25 PM   #7
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Quote:
Originally Posted by MikeN View Post
You'll be happy with the Alan Grove stuff. I have their power steering brackets on both my 64 C10 and my 65 Impala.

On both vehicles, the power steering belt runs VERY close to one of the brackets, but it has never caused any issue and I drive my vehicles quite a bit.
Good to hear, I'll report back when I get everything installed in a few weeks.
Bushman66 is offline   Reply With Quote
Old 02-16-2022, 12:38 PM   #8
MikeB
Senior Member
 
MikeB's Avatar
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,597
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Quote:
Originally Posted by The Rocknrod View Post
Yes, I'm using Alan Grove and they line up perfectly.
http://www.alangrovecomponents.com/S...Short_Pump.htm
132R - A.C.
232L - Alt.
400L - P.S.


I have used Alan Grove brackets on two vehicles over the years. Not cheap, but they are the absolute best! I've also bought Canadian-made pulleys from a local hot rod shop. Again, not cheap, but no wobble like the Chinese crap.
__________________
Mike
1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
MikeB is offline   Reply With Quote
Old 02-16-2022, 12:59 PM   #9
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: Power Steering Pump and Bracket Part numbers - SWP/Drivers Low mount

Quote:
Originally Posted by MikeN View Post
You'll be happy with the Alan Grove stuff. I have their power steering brackets on both my 64 C10 and my 65 Impala.

On both vehicles, the power steering belt runs VERY close to one of the brackets, but it has never caused any issue and I drive my vehicles quite a bit.
Yep, use a normal hex head bolt on one of the bolts there. All the rest are ARP's on mine. Close but no issues.
The Rocknrod is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com