Firewall insulation that actually fits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

52napco · 05-26-2022, 07:38 AM

Looking for input on a pad that actually fits and looks correct.
Any input is appreciated thanks

**DeadheadNM** · 05-26-2022, 07:50 AM

Contact Wes at Classic Heartbeat. He was getting a correct US made repro from a family run operation. The more widely available repro pieces look awful imo.

**Grumpy old man** · 05-26-2022, 07:53 AM

Repops , It's what they do .

https://www.67-72chevytrucks.com/vbo....php?p=8825200

http://www.repops.com/product-search...102&yr=26&ne=0

**Accelo** · 05-26-2022, 08:44 AM

I have a bunch of it laying around because it didn't fit. I used the "stick on" cab sound insulation. Likely not as effective for heat as the factory stuff. But at least I could cut it and it fit.

52napco · 05-26-2022, 01:53 PM

I ordered the repops pad from jegs..
Hopefully it's as good as their reputation

jumpsoffrock · 05-26-2022, 09:43 PM

Quote:

Originally Posted by 52napco

I ordered the repops pad from jegs..
Hopefully it's as good as their reputation

Can you find a part number? I wasn't able to locate any firewall pads for a 67-72 chevy truck on Jegs site.

52napco · 05-27-2022, 06:50 AM

Order from Wes if possible..I think he sells the best USA made pad...
The Jegs/repops numbers are CT1190 for ds , CT121 for 71&72 center and CT120 for 67-70

52napco · 06-07-2022, 09:33 PM

Got the repops insulation installed and between better quality and more experience it fits great...thanks for the heads up.

jumpsoffrock · 06-07-2022, 10:01 PM

What was the total cost? How many pieces is it? AC or without AC?

**cericd** · 06-07-2022, 11:24 PM

Quote:

Originally Posted by 52napco

Got the repops insulation installed and between better quality and more experience it fits great...thanks for the heads up.

How close is the quality of the repops to that of the original pads? Could you show any comparison or installed pics? Thanks.

52napco · 06-08-2022, 07:04 AM

Quote:

Originally Posted by jumpsoffrock

What was the total cost? How many pieces is it? AC or without AC?

Truck has ac and was 2 pieces... approximately $90 with shipping

**CarlsLQ9SS** · 06-08-2022, 07:59 AM

Does anyone make them for factory air condition? I can find the passenger side without ac but no luck for the ac truck

jumpsoffrock · 06-08-2022, 07:44 PM

^^^I don't believe there is a mat for passenger AC trucks, thats why they can't be found. I seem to remember coming to that conclusion a few months ago when I looked.

52napco · 06-08-2022, 08:18 PM

Quote:

Originally Posted by jumpsoffrock

^^^I don't believe there is a mat for passenger AC trucks, thats why they can't be found. I seem to remember coming to that conclusion a few months ago when I looked.

Correct...no pad for passenger side

**davischevy** · 06-20-2022, 10:45 PM

I'm late to this party. Repops pad made in the USA.

**cericd** · 06-20-2022, 11:26 PM

Thanks Larry, looks like nice stuff. Would you say the quality & fit is on par with the OEM stuff?

**davischevy** · 06-20-2022, 11:32 PM

Quote:

Originally Posted by cericd

Thanks Larry, looks like nice stuff. Would you say the quality & fit is on par with the OEM stuff?

I was very happy. I used original retainers.

**cericd** · 06-20-2022, 11:47 PM

Nice, do you remember where you ordered them from?

Hatzman · 06-20-2022, 11:57 PM

Has anyone used dynomat and then tried installing the pads as well? Do they fit and stay where they need to?

Thanks!

sick472 · 06-21-2022, 07:55 AM

I used sound deadener on my fire wall and covered that with a pad from GMC Pauls. It worked like I expected, very well. I opted to to use SS button head bolts to secure the pad, but that was just for a fancier look from the engine bay. The OEM retainers would work fine to. They have more than enough reach to accommodate the extra thickness of the sound deadener and then some.

05-26-2022, 07:38 AM	#1
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Firewall insulation that actually fits Looking for input on a pad that actually fits and looks correct. Any input is appreciated thanks

05-26-2022, 07:50 AM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: Firewall insulation that actually fits Contact Wes at Classic Heartbeat. He was getting a correct US made repro from a family run operation. The more widely available repro pieces look awful imo. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-26-2022, 07:53 AM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Firewall insulation that actually fits Repops , It's what they do . https://www.67-72chevytrucks.com/vbo....php?p=8825200 http://www.repops.com/product-search...102&yr=26&ne=0 __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-26-2022, 08:44 AM	#4
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,308	Re: Firewall insulation that actually fits I have a bunch of it laying around because it didn't fit. I used the "stick on" cab sound insulation. Likely not as effective for heat as the factory stuff. But at least I could cut it and it fit.

05-26-2022, 01:53 PM	#5
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Firewall insulation that actually fits I ordered the repops pad from jegs.. Hopefully it's as good as their reputation

05-27-2022, 06:50 AM	#7
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Firewall insulation that actually fits Order from Wes if possible..I think he sells the best USA made pad... The Jegs/repops numbers are CT1190 for ds , CT121 for 71&72 center and CT120 for 67-70

06-07-2022, 09:33 PM	#8
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Firewall insulation that actually fits Got the repops insulation installed and between better quality and more experience it fits great...thanks for the heads up.

06-07-2022, 10:01 PM	#9
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 978	Re: Firewall insulation that actually fits What was the total cost? How many pieces is it? AC or without AC?

06-08-2022, 07:59 AM	#12
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,164	Re: Firewall insulation that actually fits Does anyone make them for factory air condition? I can find the passenger side without ac but no luck for the ac truck __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build. Last edited by CarlsLQ9SS; 06-08-2022 at 08:49 AM.

06-08-2022, 07:44 PM	#13
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 978	Re: Firewall insulation that actually fits ^^^I don't believe there is a mat for passenger AC trucks, thats why they can't be found. I seem to remember coming to that conclusion a few months ago when I looked.

06-20-2022, 10:45 PM	#15
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,866	Re: Firewall insulation that actually fits I'm late to this party. Repops pad made in the USA. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

06-20-2022, 11:26 PM	#16
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,156	Re: Firewall insulation that actually fits Thanks Larry, looks like nice stuff. Would you say the quality & fit is on par with the OEM stuff? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

06-20-2022, 11:47 PM	#18
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,156	Re: Firewall insulation that actually fits Nice, do you remember where you ordered them from? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

06-20-2022, 11:57 PM	#19
Hatzman Registered User Join Date: Oct 2011 Location: Knoxville, TN Posts: 181	Re: Firewall insulation that actually fits Has anyone used dynomat and then tried installing the pads as well? Do they fit and stay where they need to? Thanks! __________________ Steve ___________________________________ http://67-72chevytrucks.com/vboard/s...d.php?t=618848

06-21-2022, 07:55 AM	#20
sick472 Registered User Join Date: Jul 2015 Location: Sedalia Mo. Posts: 1,131	Re: Firewall insulation that actually fits I used sound deadener on my fire wall and covered that with a pad from GMC Pauls. It worked like I expected, very well. I opted to to use SS button head bolts to secure the pad, but that was just for a fancier look from the engine bay. The OEM retainers would work fine to. They have more than enough reach to accommodate the extra thickness of the sound deadener and then some. __________________ He who is without oil shall throw the first rod. Compressions 8.7:1 1972 C10 1976 C10 (parts truck) 1985 K20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.