![]() |
![]() |
#1 |
Registered User
Join Date: Sep 2020
Location: Kennewick, Wash.
Posts: 248
|
Tilt Steering Column
OK, I am having a hard time with the aftermarket tilt column I bought from Brothers Trucks (I think) over a year ago. It's so sloppy at the shifter collar on the column, I'm having a hard time getting the indicator set right. I have the OD shift indicator installed for my 700r4. Is this common? Is there a fix?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: Tilt Steering Column
I didn't come up with anything from this forum but there's quite a bit on google...Might look at this, https://www.chevytalk.org/fusionbb/s...php?tid/51282/ I expect mating a four speed trans to a three speed column would present some issues. The factory service manual has a procedure for adjusting the linkage and the indicator...Good luck
![]()
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" ![]() "Be American, Buy American" ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|