Everything MUST go! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NEEDaCELICA · 01-03-2004, 08:21 PM

looking to sell 86 chevy stepside, 1/2 ton. 350 motor i believe its .030 over, has mild cam, gear drive, roller rockers, headers, holley 4 barrel, and flowmasters. th350 3 speed automatic (from an 84), clean interior, body in pretty good shape, few minor dings, and scratches. 15" centerling dish type rims all around (11" wide in the rear, i believe the fronts are 6" wide)all pretty new rubber. NOT smogged, won't pass, sold AS IS! willing to part out to some degree, just ask. trying to get 4500 with the wheels, maybe 4000 without.

also have an 85 fleetside, short wheelbase. frame, rear axle, front end. all body pieces in real good condition, some surface rust NO CANCER! just give them a good sand, prime, and paint. make an offer!

and last but not least, ive got a 350 small block, .030 over, dished pistons, balanced crank, high rise manifold, new lifters, mild cam, used roller rockers, no carb, no electronics, ported and polished 2.02 (camelbacks), some surface rust on the heads (they need to be rebuilt, and i dont have the springs or the valves), everything needs assembly, i believe ive also got an extra set of truck headers i could throw in too. 700 obo takes it all

email questions about any of it to extrasuperofficial@hotmail.com
you can post questions here too, but ill get them quicker if you email me. and just so you know im located in northern cali

NEEDaCELICA · 01-04-2004, 01:50 AM

bump

*1FaastC10* · 01-04-2004, 03:14 AM

pics? specific location?

NEEDaCELICA · 01-04-2004, 07:07 AM

no pics, im in santa rosa ca, about 50 miles north of san francisco

NEEDaCELICA · 01-05-2004, 04:14 AM

bump

NEEDaCELICA · 01-07-2004, 01:35 AM

nobody is even interested in the small block parts?

Tom · 01-07-2004, 08:57 PM

Im looking for a good tailgate.

NEEDaCELICA · 01-09-2004, 03:47 PM

the one on the fleetside? unfortuanetley its kinda banged up, i dont know that it would be worth it for you to have to pay to have it sent to AZ

NEEDaCELICA · 01-16-2004, 02:23 AM

bump

*1FaastC10* · 01-16-2004, 02:49 AM

pointless to bump without pics...

01-03-2004, 08:21 PM	#1
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	85-86 chevy truck parts, full flletside body, small block stuff f/s looking to sell 86 chevy stepside, 1/2 ton. 350 motor i believe its .030 over, has mild cam, gear drive, roller rockers, headers, holley 4 barrel, and flowmasters. th350 3 speed automatic (from an 84), clean interior, body in pretty good shape, few minor dings, and scratches. 15" centerling dish type rims all around (11" wide in the rear, i believe the fronts are 6" wide)all pretty new rubber. NOT smogged, won't pass, sold AS IS! willing to part out to some degree, just ask. trying to get 4500 with the wheels, maybe 4000 without. also have an 85 fleetside, short wheelbase. frame, rear axle, front end. all body pieces in real good condition, some surface rust NO CANCER! just give them a good sand, prime, and paint. make an offer! and last but not least, ive got a 350 small block, .030 over, dished pistons, balanced crank, high rise manifold, new lifters, mild cam, used roller rockers, no carb, no electronics, ported and polished 2.02 (camelbacks), some surface rust on the heads (they need to be rebuilt, and i dont have the springs or the valves), everything needs assembly, i believe ive also got an extra set of truck headers i could throw in too. 700 obo takes it all email questions about any of it to extrasuperofficial@hotmail.com you can post questions here too, but ill get them quicker if you email me. and just so you know im located in northern cali Last edited by NEEDaCELICA; 01-04-2004 at 01:49 AM.

01-07-2004, 08:57 PM	#7
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,750	Im looking for a good tailgate. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

01-04-2004, 01:50 AM	#2
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	bump

01-04-2004, 03:14 AM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	pics? specific location?

01-04-2004, 07:07 AM	#4
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	no pics, im in santa rosa ca, about 50 miles north of san francisco

01-05-2004, 04:14 AM	#5
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	bump

01-07-2004, 01:35 AM	#6
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	nobody is even interested in the small block parts?

01-09-2004, 03:47 PM	#8
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	the one on the fleetside? unfortuanetley its kinda banged up, i dont know that it would be worth it for you to have to pay to have it sent to AZ

01-16-2004, 02:23 AM	#9
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	bump

01-16-2004, 02:49 AM	#10
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	pointless to bump without pics...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.