Weatherstripping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rubbertiredtramp · 01-10-2023, 09:51 AM

I need new door to cab seals, it looks like there are two types available glue on and push on. Has anybody tried the push on? Do they stay in place? I thought it would be nice not to mess with glue if the push on ones work.

**Accelo** · 01-10-2023, 10:23 AM

I used the Honda Civic seals. Couldn't be happier. They are push on and have had no issues.
More information:
https://67-72chevytrucks.com/vboard/...nda+door+seals

06-11 Honda 2dr civic fit. The four doors versions are too short. They come it two colors on the internal plastic.
Weatherstripping from a 2013 Ram standard cab truck also works.

I purchased my Honda seals new. Noticed they are often "out of stock" now days?
Cheers

61hawk · 01-10-2023, 10:28 AM

Go with the Honda Civic weatherstrips and don't look back. They go on perfect and you can remove them if you need to.

Honda 72315-SVA-A01ZA Right Side
Honda 72355-SVA-A01ZA Left Side

Braunschweiger · 01-10-2023, 12:12 PM

The Honda Civic door seals are fantastic,
they close with a soft click, great

Rubbertiredtramp · 01-10-2023, 01:21 PM

OK will try that, thanks for the tip!

slorio · 01-10-2023, 07:01 PM

Couldn't find Civic coupes in pull a part. Ended up getting weatherstrip out of Honda Element with the 60/40 double door. Strips ended up a couple of inches longer than what I needed.
Regards
Steve

**62bagger** · 01-10-2023, 07:05 PM

I put new rubber seals on my truck, and they keep the doors from closing completely. I tried trimming them, but I am still having the problem. Will the Honda seals help with that issue?

AcampoDave · 01-11-2023, 11:57 PM

They might, but in my experience they always seem to need some door adjustments. It really may depend on if yours has had body panels changed or door hinges worn out. Honda seals are great, and so are the Prescion push ons, but they can't compensate for poor door alignment. In my case I bit the bullet and pulled the fender and cowel corner to get them out of the way and got a helper and adjusted the door. Hinge to cab lets you adjust up/ down and side to side, while hinge to door sets the depth in the frame. It takes patience and a floor jack at the door bottom is a big help too.

bigmoe · 01-12-2023, 12:50 PM

Honda seals on my 65 as well. I even managed to find a gray set to match my silver interior.

01-10-2023, 09:51 AM	#1
Rubbertiredtramp Registered User Join Date: May 2019 Location: Brandon Manitoba Canada Posts: 68	Weatherstripping I need new door to cab seals, it looks like there are two types available glue on and push on. Has anybody tried the push on? Do they stay in place? I thought it would be nice not to mess with glue if the push on ones work.

01-10-2023, 10:23 AM	#2
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,296	Re: Weatherstripping I used the Honda Civic seals. Couldn't be happier. They are push on and have had no issues. More information: https://67-72chevytrucks.com/vboard/...nda+door+seals 06-11 Honda 2dr civic fit. The four doors versions are too short. They come it two colors on the internal plastic. Weatherstripping from a 2013 Ram standard cab truck also works. I purchased my Honda seals new. Noticed they are often "out of stock" now days? Cheers Last edited by Accelo; 01-10-2023 at 10:30 AM.

01-10-2023, 10:28 AM	#3
61hawk Registered User Join Date: Mar 2008 Location: Lexington, SC Posts: 324	Re: Weatherstripping Go with the Honda Civic weatherstrips and don't look back. They go on perfect and you can remove them if you need to. Honda 72315-SVA-A01ZA Right Side Honda 72355-SVA-A01ZA Left Side

01-10-2023, 12:12 PM	#4
Braunschweiger Registered User Join Date: Aug 2020 Location: Braunschweig, Lower Saxony, Germany Posts: 812	Re: Weatherstripping The Honda Civic door seals are fantastic, they close with a soft click, great Attached Images __________________ ------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782

01-10-2023, 01:21 PM	#5
Rubbertiredtramp Registered User Join Date: May 2019 Location: Brandon Manitoba Canada Posts: 68	Re: Weatherstripping OK will try that, thanks for the tip!

01-10-2023, 07:01 PM	#6
slorio Registered User Join Date: Sep 2006 Location: Louisiana Posts: 375	Re: Weatherstripping Couldn't find Civic coupes in pull a part. Ended up getting weatherstrip out of Honda Element with the 60/40 double door. Strips ended up a couple of inches longer than what I needed. Regards Steve

01-10-2023, 07:05 PM	#7
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 285	Re: Weatherstripping I put new rubber seals on my truck, and they keep the doors from closing completely. I tried trimming them, but I am still having the problem. Will the Honda seals help with that issue?

01-11-2023, 11:57 PM	#8
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: Weatherstripping They might, but in my experience they always seem to need some door adjustments. It really may depend on if yours has had body panels changed or door hinges worn out. Honda seals are great, and so are the Prescion push ons, but they can't compensate for poor door alignment. In my case I bit the bullet and pulled the fender and cowel corner to get them out of the way and got a helper and adjusted the door. Hinge to cab lets you adjust up/ down and side to side, while hinge to door sets the depth in the frame. It takes patience and a floor jack at the door bottom is a big help too.

01-12-2023, 12:50 PM	#9
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: Weatherstripping Honda seals on my 65 as well. I even managed to find a gray set to match my silver interior.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.