Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-30-2023, 11:38 PM | #1 |
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 449
|
1967 K20 Rear Spring Hanger Help
Hi everyone!
Well, I have hit a bit of a snag in my restoration project. It looks like the rear spring hangers on the back of the frame at some point were tweaked pretty good. They were removed and had a plate welded on the back of them and then bolted back on. My original plan was to clean them up and use new grade 8 hardware to reattach them, but I found that on the driver side of the frame the hanger is bent a bit and actually dips outward towards the driver's side of the truck. This twists the spring a bit. I was hoping to replace both hangers but I am not sure where to look for replacement parts. Does anyone know where I can find replacements? Here are some pictures showing what I am talking about.
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
01-31-2023, 12:53 AM | #2 |
Registered User
Join Date: Mar 2013
Location: Lewisberry, Pa.
Posts: 544
|
Re: 1967 K20 Rear Spring Hanger Help
You might want to try a company in Penna. called ESPO Springsnthings. They had the rear leaf spring bracket for my 66 K-10. Real nice people. Good luck.
|
01-31-2023, 08:09 AM | #3 | |
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 449
|
Re: 1967 K20 Rear Spring Hanger Help
Quote:
Clay
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
|
Bookmarks |
|
|