AL WTB: random firewall, dash and door cutouts

[General23cmp]

UPDATE - I HAVE EVERYTHING REQUESTED

Looking for specific cab, dash, and door metal panels as mine were butchered by someone.

1. Inner door metal around the regulator (someone started power windows or something and cut a big hole the size of a shoe there).
2. Dash speaker grill.
3. Radio opening (I know they make a panel).
4. The outer firewall, brake booster area.

Would like to get from the same person if possible to save on shipping (all of these are flat), unless you are near north Alabama. I can send photos of my areas to make sure the piece you cut is big enough. Thanks guys.

[402Bowtie]

Does it matter which door?

If it's the passenger door, I definitely could get all of those cuts... Even if driver side, I might be able to help too... Have to check. Only thing is that it might be a few months, as they're on a truck in another state.

Perhaps someone can help you sooner...

[General23cmp]

Originally Posted by 402Bowtie

Does it matter which door?

If it's the passenger door, I definitely could get all of those cuts... Even if driver side, I might be able to help too... Have to check. Only thing is that it might be a few months, as they're on a truck in another state.

Perhaps someone can help you sooner...

I need both doors, and it cannot be two passenger doors I think because I need the hole pattern part. Thanks.

[1rippen6]

I have a radio patch, I'll see if I have a picture on my phone

[richard2717]

What year truck? I have a 67 radio patch and should have the door parts. We already spoke about the outer firewall on my 67 cab but I might have one on a 72 cab if that will work

Edit for a few pictures. The doors are a 72 model. drivers door is missing missing the outer latch area. This firewall is from a 72 Blazer if it makes a difference to you. circle the areas where you would need the cut

.

[General23cmp]

Originally Posted by 1rippen6

I have a radio patch, I'll see if I have a picture on my phone

The truck is a 67. I think the firewall piece would work off your cab. I only need the radio hole on the dash, but would consider the whole piece with the ash tray. I edited your pictures to show what I need cut. I tried to dodge the spot welds on the firewall, but kinda need the upper horizontal ones. Both doors need the same cut as shown on the one picture. Also, I do need a speaker grill on the center of the dash. I saw your one photo that the guy didn’t want. If you have one better, I’d prefer that, but I’d take the rusty one while you’re already cutting/shipping for me. Please let me know a price to cut and ship to 35613 before cutting. I am looking locally, and shipping alone may make this too expensive right now. Thanks.

[richard2717]

Here are pictures of the cuts. Sending you a pm as well.


.

[General23cmp]

Originally Posted by richard2717

Here are pictures of the cuts. Sending you a pm as well.


.

Perfect! Thanks. Replied to PM.