OEM window regulator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 04-17-2023, 09:20 AM

does this look right 1 roller facing the wrong way

[url=https://flic.kr/p/2otRzAe]16817373676711391419172705029436[/

**chewychevy67** · 04-17-2023, 10:10 AM

Yes that is the way they are. The 2 facing the same way go into the glass Chanel and the single goes into the Chanel welded to the door.

**jaros44sr** · 04-18-2023, 08:34 AM

Thanks for your speedy response

Really enjoy your build thread, great stuff going on there

**jaros44sr** · 04-20-2023, 09:29 AM

Not seeing any welded track for the third roller

16819971000656949401584091173875 by

16819970316472920720017156480355 by [url=https://www.flickr.com/photos/198023675@N07

Any help?

**A1971Blazer** · 04-20-2023, 09:45 AM

It's INSIDE the door on the inner side right above the opening

**chewychevy67** · 04-20-2023, 10:21 AM

Herea a picture of my door after I removed the door skin. It's circled.

**jaros44sr** · 04-20-2023, 07:26 PM

Thanks guys for the help

Apparently repop doors didn't come with that

Now I have to find someone willing to cut up a door for that channel

This place is invaluable, we should charge for stupid questions

**A1971Blazer** · 04-20-2023, 07:36 PM

I bought repop doors for my 67 build...they have the channel in there...

**71CHEVYSHORTBED402** · 04-21-2023, 12:02 AM

Quote:

Originally Posted by jaros44sr

Thanks guys for the help

Apparently repop doors didn't come with that

Now I have to find someone willing to cut up a door for that channel

This place is invaluable, we should charge for stupid questions

That's not a dumb question at all, you should see some of mine, wowza. Can't believe they didn't install that. They even mark where they go? It has to be exactly right. Lub that channel up once there, and don't forget the rubber bumpers for the roll ups. Hopefully they installed window platforms, yikes.

**Richard** · 04-21-2023, 12:44 AM

Look at the area I circled, see the spot welds? Right behind there. Sorry about pic quality, had to take a snip of your photo as I could not download it. If it is not there it fell off as it was put in otherwise the spot welds would not be there.

**jaros44sr** · 04-21-2023, 09:44 AM

OK, I'm an idiot

Even with the prompting of location and pictures I was looking in the wrong location, I am going to call this a senior moment and wave my old folks card

Richard hit the nail on the head when he saw the spot welds, and there it WAS

Thanks for all help from use guys, disaster Averted

**jaros44sr** · 04-24-2023, 09:46 AM

16823437909042806401539438589215 by [url=https://www.flickr.com/photos/198023675@N07

I like to assemble hex drive set screws

Cross threading drives me nuts, well more so.....

None OEM window crank handle

04-17-2023, 09:20 AM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	OEM window regulator does this look right 1 roller facing the wrong way [url=https://flic.kr/p/2otRzAe]16817373676711391419172705029436[/ __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-17-2023, 10:10 AM	#2
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,579	Re: OEM window regulator Yes that is the way they are. The 2 facing the same way go into the glass Chanel and the single goes into the Chanel welded to the door.

04-18-2023, 08:34 AM	#3
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	Re: OEM window regulator Thanks for your speedy response Really enjoy your build thread, great stuff going on there __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-20-2023, 09:29 AM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	Re: OEM window regulator Not seeing any welded track for the third roller 16819971000656949401584091173875 by 16819970316472920720017156480355 by [url=https://www.flickr.com/photos/198023675@N07 Any help? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-20-2023, 09:45 AM	#5
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,212	Re: OEM window regulator It's INSIDE the door on the inner side right above the opening __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

04-20-2023, 10:21 AM	#6
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,579	Re: OEM window regulator Herea a picture of my door after I removed the door skin. It's circled. Attached Images

04-20-2023, 07:26 PM	#7
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	Re: OEM window regulator Thanks guys for the help Apparently repop doors didn't come with that Now I have to find someone willing to cut up a door for that channel This place is invaluable, we should charge for stupid questions __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-20-2023, 07:36 PM	#8
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,212	Re: OEM window regulator I bought repop doors for my 67 build...they have the channel in there... __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

04-21-2023, 12:44 AM	#10
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,922	Re: OEM window regulator Look at the area I circled, see the spot welds? Right behind there. Sorry about pic quality, had to take a snip of your photo as I could not download it. If it is not there it fell off as it was put in otherwise the spot welds would not be there. Attached Images __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

04-21-2023, 09:44 AM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	Re: OEM window regulator OK, I'm an idiot Even with the prompting of location and pictures I was looking in the wrong location, I am going to call this a senior moment and wave my old folks card Richard hit the nail on the head when he saw the spot welds, and there it WAS Thanks for all help from use guys, disaster Averted __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-24-2023, 09:46 AM	#12
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,797	Re: OEM window regulator 16823437909042806401539438589215 by [url=https://www.flickr.com/photos/198023675@N07 I like to assemble hex drive set screws Cross threading drives me nuts, well more so..... None OEM window crank handle __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-24-2023 at 09:52 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.