Oil filter adapter nightmare - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DoubleL · 03-10-2024, 04:07 PM

Hey guys, I have a 1965 C20 with a stock 283.
I am trying to find an adapter to convert the old cannister
filter to a spin on one. I have tried 3 adapters that were
supposed to fit from mr gasket to Speedway. All of them have
1/4 bolt to bolt it to my block. My block takes a 5/16 bolt. Does
anyone know a bolt on solution? Thanks!

**Getter-Done** · 03-10-2024, 05:34 PM

There is on E bay you could ask question about in the link below.

Link: https://www.ebay.com/itm/33051248436...XYTK0ERT1ST1WG

Here is one on Speedway site that I think is the type you need.

Link: https://www.speedwaymotors.com/Engin...pass,1160.html

ACK · 03-11-2024, 04:59 PM

If you still have any of Speedway adapters on hand, have you considered drilling out the through holes to .332" to accommodate 5/16" bolts.

**dmb** · 03-11-2024, 05:08 PM

Quote:

Originally Posted by Getter-Done

There is on E bay you could ask question about in the link below.

Link: https://www.ebay.com/itm/33051248436...XYTK0ERT1ST1WG

Here is one on Speedway site that I think is the type you need.

Link: https://www.speedwaymotors.com/Engin...pass,1160.html

X2 on the speedwaymotors

03-10-2024, 04:07 PM	#1
DoubleL Registered User Join Date: Jun 2012 Location: Rathdrum, Idaho Posts: 305	Oil filter adapter nightmare Hey guys, I have a 1965 C20 with a stock 283. I am trying to find an adapter to convert the old cannister filter to a spin on one. I have tried 3 adapters that were supposed to fit from mr gasket to Speedway. All of them have 1/4 bolt to bolt it to my block. My block takes a 5/16 bolt. Does anyone know a bolt on solution? Thanks! __________________ My 1965 C-20 project https://67-72chevytrucks.com/vboard/...d.php?t=835095

03-10-2024, 05:34 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,414	Re: Oil filter adapter nightmare There is on E bay you could ask question about in the link below. Link: https://www.ebay.com/itm/33051248436...XYTK0ERT1ST1WG Here is one on Speedway site that I think is the type you need. Link: https://www.speedwaymotors.com/Engin...pass,1160.html __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-11-2024, 04:59 PM	#3
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: Oil filter adapter nightmare If you still have any of Speedway adapters on hand, have you considered drilling out the through holes to .332" to accommodate 5/16" bolts. __________________ My truck ain't dead, it just smells funny.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.