67-72 on an '84 frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_396 · 01-17-2004, 08:46 PM

how difficult is it to put a 67-72 cab, and front clip on a '73-'87 4x4 frame. What do I need to change to make every work and fit properly?

Thanks

wrathchild · 01-17-2004, 10:20 PM

Check with Mudder67-He's done it with I believe a 77 frame..also try doing a search on the subject..seems this has been asked before.............................

dalejr8 · 01-17-2004, 11:26 PM

YA, mudder67 has done it and it turned out nice you have to know what to look for to tell it isn't a 67-72.

Blue Beard · 01-18-2004, 12:06 AM

wonder if that would work on a 2wd truck......?

sweet n rare67 · 01-22-2004, 12:59 PM

I met Mudder67 at a show in Lincoln Nebraska last year, he is real nice guy. I talked to him about swapping the frame under my 67 and from what he said the biggest change you have to make is taking a couple of inches out of the frame so that the wheel base is right. I would also like more info about it though. guess we will have to talk to him.

67_396 · 01-22-2004, 01:31 PM

hey sweet n rare67

are you going to the swap meet in Des Moines on the 1st of Feb?

dalejr8 · 01-22-2004, 11:27 PM

when I talked to mudder 67 back at the show in Indy (Sept 03) I thought he said he cut off a couple inches in the back and had to move the front body mounts for the core support, I think that was about it.

Mudder · 01-23-2004, 04:52 AM

Cut the frame in the middle (behind the cab). The front was easy. Just welded plates onto the original mounts. I have pics of all the mounts and you can pretty much tell where they are located on the frame. The most important thing is to get the cab back far enough from the distributor to where you can remove it. If you need pics or info let me know.

YankeeWhite · 01-26-2004, 11:55 PM

If anyone needs one of these frames, I have SWB frame, 73-87 not sure on year, which I had blasted primed and painted in John Deere Chassis Black. Don't need it anymore, sell for what I have in it. Kansas.

01-17-2004, 08:46 PM	#1
67_396 Registered User Join Date: Feb 2003 Location: Mason City Iowa Posts: 98	67-72 on an '84 frame how difficult is it to put a 67-72 cab, and front clip on a '73-'87 4x4 frame. What do I need to change to make every work and fit properly? Thanks __________________ 2003 Yamaha Blaster for sale : $1900 OBO

01-18-2004, 12:06 AM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	wonder if that would work on a 2wd truck......? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-22-2004, 12:59 PM	#5
sweet n rare67 Young truck fanatic Join Date: Jun 2003 Location: The wonderful Mat-Su Valley....Palmer, Ak Posts: 253	I met Mudder67 at a show in Lincoln Nebraska last year, he is real nice guy. I talked to him about swapping the frame under my 67 and from what he said the biggest change you have to make is taking a couple of inches out of the frame so that the wheel base is right. I would also like more info about it though. guess we will have to talk to him. __________________ '67 Chevy Longstep 2wd 350 w/4spd manual Muncie M21. My first project. Proud to be Valley Trash

01-22-2004, 01:31 PM	#6
67_396 Registered User Join Date: Feb 2003 Location: Mason City Iowa Posts: 98	hey sweet n rare67 are you going to the swap meet in Des Moines on the 1st of Feb? __________________ 2003 Yamaha Blaster for sale : $1900 OBO

01-26-2004, 11:55 PM	#9
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	If anyone needs one of these frames, I have SWB frame, 73-87 not sure on year, which I had blasted primed and painted in John Deere Chassis Black. Don't need it anymore, sell for what I have in it. Kansas. __________________ 1964 Impala 2dr Hdtp 1963 Nova 2dr sedan 1964 Impala 4dr sedan

01-17-2004, 10:20 PM	#2
wrathchild LIKE 'EM BIG AND TOPLESS Join Date: Dec 2000 Location: Frederic,Michigan Posts: 596	Check with Mudder67-He's done it with I believe a 77 frame..also try doing a search on the subject..seems this has been asked before.............................

01-17-2004, 11:26 PM	#3
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	YA, mudder67 has done it and it turned out nice you have to know what to look for to tell it isn't a 67-72.

01-22-2004, 11:27 PM	#7
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	when I talked to mudder 67 back at the show in Indy (Sept 03) I thought he said he cut off a couple inches in the back and had to move the front body mounts for the core support, I think that was about it.

01-23-2004, 04:52 AM	#8
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Cut the frame in the middle (behind the cab). The front was easy. Just welded plates onto the original mounts. I have pics of all the mounts and you can pretty much tell where they are located on the frame. The most important thing is to get the cab back far enough from the distributor to where you can remove it. If you need pics or info let me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.