WEEKEND SPECIAL!! Feb 6th and 7th - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-30-2004, 09:53 PM

This is for all my local guys that want to make a trip up here. I'll be dealing I can almost guarantee you won't find parts cheaper, I need to move some stuff out of here and I won't have to ship anything if you come pick it up. Joesjunk from Mo., Sakohntr from Minn., and Zoomy from Wisc. are coming up to get some parts so I'm going to be dealing on what parts I have left. Let me know if your coming and what time!!!!!!! Thanks, most of you know I have alot to choose from!!!!!!!!! Joerocks from North Carolina is coming soon, and so is Smonty from Texas, and hopefully Bobvilla from Texas too. Thanks Randy

ltitsnw · 01-31-2004, 03:26 AM

Hi Randy....I'll be there some time around noon, in the middle of April......I'm always late.....I'll send you a PM........Thanks Troy

Fred T · 01-31-2004, 08:58 AM

Too bad it's the same weekend as the big swap meet here in Wichita.

69 air cab · 01-31-2004, 09:49 AM

Randy,
I may have asked you before but do you have any OEM SB spark plug wire retainers (holders)?
Thanks

lash · 01-31-2004, 10:13 AM

Randy, Do you have any nice original sliders?

teeitup · 01-31-2004, 10:18 AM

Troy, you mean you can't get here from Afganistan in time?????????

Fred, I can do it the next weekend too, these guys were just all coming that weekend is why I'm doing it then.
Sorry Bill none of those.
Lash, I got some sliders but they need some work.
Thanks guys, 3 weeks till I go to L.A.!!!!!!

sakohntr · 01-31-2004, 12:55 PM

I have room coming back from randys if you need something dropped up north. Nothing too major but free to help move some of his inventory. AND HAS HE GOT INVENTORY!

*botboy* · 01-31-2004, 03:16 PM

Hey bruce where is Floodwood? How far away from Delano? Got room for a '72 Outer grille and front bumper? If so Randy how much do you want for those two?

Also do you have any longbed fleetside steel bed floors for a '72 C10? (I only want the floor only for right now)? If so how much?

teeitup · 01-31-2004, 06:05 PM

Thanks Bruce!!!
Botboy, sorry no good grills or 72 bumpers. I only have a good bed complete. You ever sell that truck yet?
Thanks Randy

vtblazer · 01-31-2004, 10:24 PM

sent you a pm

Shane's Parts · 01-31-2004, 10:33 PM

69 air cab are you talking about the spakplug retainers that bolt on the back side of the block next to the trans. If so I think I have a set of them. Let me know and I'll check to make sure..

Shane's Parts · 01-31-2004, 10:35 PM

randy, pm sent..

ltitsnw · 02-01-2004, 02:36 AM

Hi...Randy...sent you a PM......Troy
ttt

gutterman01 · 02-01-2004, 03:48 AM

how about some good doors and give me a price I have a freind coming that way next weekend to see what all you have

teeitup · 02-01-2004, 06:34 AM

I got doors $75 each for 67-71 and $150 each for 72's. We may not be able to see anything, its supposed to snow 12 inches here.
Thanks Randy

69 air cab · 02-01-2004, 11:02 AM

Shane's Parts,
Yes the OEM retainers......pm sent

ltitsnw · 02-01-2004, 01:03 PM

Hi Randy.......Grill got it from you same time I got the support.....Troy

72superBB · 02-01-2004, 01:05 PM

Randy,

Thought any more about the red & black thing up against the container on the south side of your cubbyhole? lol. would look nice on that frame of zoomy's!

Would have to crap the $ for that!

See ya

Ron

teeitup · 02-01-2004, 01:11 PM

Hi Ron, I got another deal going right now and if it works out that thing will be for sale for $500 but only if this other deal goes through. I was going to see if you could haul a truck up from Tulsa for me if you were coming up to get the frame. I'm working on a 68 swb at the place I got the doors from down there but not sure on it either. Thanks Randy

teeitup · 02-01-2004, 01:15 PM

Oh ya Troy, its back there, I went blank for a moment this morning, sorry. I knew there was something else there I just could place it. Let me know on the other bed and fenders I'm dealing alot lately. Thanks Randy

72superBB · 02-01-2004, 01:17 PM

I am sure I could talk my dad into that. If it would fit on a car tow dolly. I am sure for some gas $ he would. Tulsa is about an hour & half east of her, but HWy 75 goes north right to Topeka from there.

If I made the trip with him, I am sure he would as long as we can do it in a day.

I could get that thing from you, but next month. My monthly truck budget would be gone for that frame. Maybe we can work someting out.

We will keep in touch.

Thanks,

Ron

*botboy* · 02-01-2004, 01:28 PM

No still haven't sold the truck, going to relist it this week watch for updates.

I also need: (in other words, if you have them how much - all for '72 C10 Super Cheyenne)
black door panels (pair)
black armrests (pair)
Inner grill
battery tray (solid - no holes!)
Inner fenders
Interior light

thanks, might have just sold several hi-dollar items so the truck is getting a few much-needed cosmetic upgrades...

teeitup · 02-01-2004, 01:33 PM

I got some nice 72 black scroll type for $75 pair, no arm rest, reproduction is about the only way with those. I got new battery tray, and used sides $25, they would have to be welded together but no rust then, I got reproduction inners a few small dings nothing bad $120 for the pair. I got an interior light lens that all. Thanks Randy

*botboy* · 02-01-2004, 02:52 PM

Could I get a pic of the dings on the inner fenders? botboy60@hotmail.com. I will take the battery tray and sides, more likely than not the inner fenders when I get the pics and all I need of the interior light was the lens anyways

how much for it?

01-30-2004, 09:53 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	WEEKEND SPECIAL!! Feb 6th and 7th This is for all my local guys that want to make a trip up here. I'll be dealing I can almost guarantee you won't find parts cheaper, I need to move some stuff out of here and I won't have to ship anything if you come pick it up. Joesjunk from Mo., Sakohntr from Minn., and Zoomy from Wisc. are coming up to get some parts so I'm going to be dealing on what parts I have left. Let me know if your coming and what time!!!!!!! Thanks, most of you know I have alot to choose from!!!!!!!!! Joerocks from North Carolina is coming soon, and so is Smonty from Texas, and hopefully Bobvilla from Texas too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2004, 03:26 AM	#2
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Hi Randy....I'll be there some time around noon, in the middle of April......I'm always late.....I'll send you a PM........Thanks Troy __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

01-31-2004, 08:58 AM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Too bad it's the same weekend as the big swap meet here in Wichita. __________________ Fred There is no such thing as too much cam...just not enough engine.

01-31-2004, 10:18 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Troy, you mean you can't get here from Afganistan in time????????? Fred, I can do it the next weekend too, these guys were just all coming that weekend is why I'm doing it then. Sorry Bill none of those. Lash, I got some sliders but they need some work. Thanks guys, 3 weeks till I go to L.A.!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2004, 12:55 PM	#7
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	room I have room coming back from randys if you need something dropped up north. Nothing too major but free to help move some of his inventory. AND HAS HE GOT INVENTORY! __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-31-2004, 09:49 AM	#4
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Randy, I may have asked you before but do you have any OEM SB spark plug wire retainers (holders)? Thanks

01-31-2004, 10:13 AM	#5
lash Registered User Join Date: Feb 2002 Location: Central Illinois Posts: 163	Randy, Do you have any nice original sliders?

01-31-2004, 03:16 PM	#8
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Hey bruce where is Floodwood? How far away from Delano? Got room for a '72 Outer grille and front bumper? If so Randy how much do you want for those two? Also do you have any longbed fleetside steel bed floors for a '72 C10? (I only want the floor only for right now)? If so how much?

01-31-2004, 06:05 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Thanks Bruce!!! Botboy, sorry no good grills or 72 bumpers. I only have a good bed complete. You ever sell that truck yet? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-31-2004 at 06:30 PM.

01-31-2004, 10:24 PM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	sent you a pm

01-31-2004, 10:33 PM	#11
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	69 air cab are you talking about the spakplug retainers that bolt on the back side of the block next to the trans. If so I think I have a set of them. Let me know and I'll check to make sure..

01-31-2004, 10:35 PM	#12
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	randy, pm sent..

02-01-2004, 02:36 AM	#13
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Hi...Randy...sent you a PM......Troy ttt __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

02-01-2004, 03:48 AM	#14
gutterman01 Registered User Join Date: Sep 2003 Location: kentucky Posts: 240	teeitup how about some good doors and give me a price I have a freind coming that way next weekend to see what all you have

02-01-2004, 06:34 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got doors $75 each for 67-71 and $150 each for 72's. We may not be able to see anything, its supposed to snow 12 inches here. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-01-2004, 11:02 AM	#16
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Shane's Parts, Yes the OEM retainers......pm sent

02-01-2004, 01:03 PM	#17
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Grill Hi Randy.......Grill got it from you same time I got the support.....Troy Attached Images __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

02-01-2004, 01:05 PM	#18
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	Randy, Thought any more about the red & black thing up against the container on the south side of your cubbyhole? lol. would look nice on that frame of zoomy's! Would have to crap the $ for that! See ya Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

02-01-2004, 01:11 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Hi Ron, I got another deal going right now and if it works out that thing will be for sale for $500 but only if this other deal goes through. I was going to see if you could haul a truck up from Tulsa for me if you were coming up to get the frame. I'm working on a 68 swb at the place I got the doors from down there but not sure on it either. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2004, 01:15 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Oh ya Troy, its back there, I went blank for a moment this morning, sorry. I knew there was something else there I just could place it. Let me know on the other bed and fenders I'm dealing alot lately. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2004, 01:17 PM	#21
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	I am sure I could talk my dad into that. If it would fit on a car tow dolly. I am sure for some gas $ he would. Tulsa is about an hour & half east of her, but HWy 75 goes north right to Topeka from there. If I made the trip with him, I am sure he would as long as we can do it in a day. I could get that thing from you, but next month. My monthly truck budget would be gone for that frame. Maybe we can work someting out. We will keep in touch. Thanks, Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

02-01-2004, 01:28 PM	#22
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	No still haven't sold the truck, going to relist it this week watch for updates. I also need: (in other words, if you have them how much - all for '72 C10 Super Cheyenne) black door panels (pair) black armrests (pair) Inner grill battery tray (solid - no holes!) Inner fenders Interior light thanks, might have just sold several hi-dollar items so the truck is getting a few much-needed cosmetic upgrades...

02-01-2004, 01:33 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got some nice 72 black scroll type for $75 pair, no arm rest, reproduction is about the only way with those. I got new battery tray, and used sides $25, they would have to be welded together but no rust then, I got reproduction inners a few small dings nothing bad $120 for the pair. I got an interior light lens that all. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2004, 02:52 PM	#24
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Could I get a pic of the dings on the inner fenders? botboy60@hotmail.com. I will take the battery tray and sides, more likely than not the inner fenders when I get the pics and all I need of the interior light was the lens anyways how much for it?

Register or Log In To remove these advertisements.