SBC 406 450 hp For Sale!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 01-30-2004, 11:42 PM

I am buying a BBC project from a fellow Member so my fresh built never ran 406 must go. Specs are as follows. 2 bolt main 400 block machined .030 align bored and checked for run out fully clearanced Mag checked and pressure checked Hot tanked and Jet washed Bore torque plate honed to give true pistons walls Rods have been shotpeened Assmebly has been dynamic balanced file fit rings blue print clearance New cam bearings mains and freeze plugs Speed pro Hyperutectic Pistons 9.8 to 1 Race prepared nodular iron crank micropolished and wear sized and indexed. Childs and Albert moly file fit rings GM PINK RODS pioneer bolts Pete Jackson gear drive Lunati part # 0012lk cam with .550 lift at .050 3/8 Rocker studs with roller tipped rockers new push rods Fel pro gaskets 7 degree lock and lunati valve springs Gm cast heads that have been stage 3 ported and polished 2.02/1.60 s/s valves These heads flow very very well and the port work is awesome!! 76CC head. Have over $3000 invested Will take $2600 for it. Pm me for more info!! Engine was built by a builder in Virginia and has a great reputation. Here is a link to his website http://www.maxhorsepower.com/ Mark Lim is the builder. Call me at 502-376-9408 if needed. Eric Also includes performer Rpm intake. Rods are 5.7" forged gm. Will Ship!!

phantom dually · 01-30-2004, 11:45 PM

I also will post pics asap.

phantom dually · 01-31-2004, 12:37 PM

ttt

SCOTI · 01-31-2004, 05:43 PM

What cc's are the heads? Would you consider selling just the assembled shortblock?

phantom dually · 01-31-2004, 10:53 PM

I would really like to keep this all together. If the price were right then that would be a option. Pm me with any offers!!

phantom dually · 01-31-2004, 10:54 PM

76CC with 9:8.1 compression.

phantom dually · 02-01-2004, 07:45 PM

I will also pay meet halfway on shipping up to $400

phantom dually · 02-01-2004, 08:31 PM

pic#1

phantom dually · 02-01-2004, 08:31 PM

3#

phantom dually · 02-01-2004, 08:32 PM

pic

phantom dually · 02-01-2004, 08:33 PM

pic 5

phantom dually · 02-01-2004, 08:34 PM

Exhaust ports. Tried to get good pic of awesome port work.

phantom dually · 02-01-2004, 08:36 PM

Sorry about the crappy pics here!! The tape I had over the exhaust ports has left a sticky film that will come right off.

phantom dually · 02-02-2004, 09:55 PM

TTT

phantom dually · 02-03-2004, 01:02 AM

TTT

75-K5 · 02-03-2004, 07:13 PM

Are they 5.7" rods? Also, would you take a vehicle trade (Jeep Cherokee)?

phantom dually · 02-03-2004, 08:15 PM

They are 5.7 rods. Also I would prefer to sell outright. But if the vehicle is something that would move quiclk I would consider it also. Pm me to talk further.

phantom dually · 02-04-2004, 11:05 PM

TTT

75-K5 · 02-05-2004, 12:37 AM

I PMed you, but your mailbox was full.

phantom dually · 02-05-2004, 12:49 AM

It is now emptied Sorry!!!

75-K5 · 02-05-2004, 03:10 AM

Hey, since your PM box was full, I emailed you...did you get that?

If not, I can re-PM.

phantom dually · 02-05-2004, 10:15 PM

I will check or try sending to jegray@bellsouth.net

phantom dually · 02-06-2004, 09:13 PM

TTT

75-K5 · 02-06-2004, 09:16 PM

Sent PM again

phantom dually · 02-06-2004, 09:20 PM

Got pics??

01-30-2004, 11:45 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I also will post pics asap. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-31-2004, 12:37 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-31-2004, 05:43 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	What cc's are the heads? Would you consider selling just the assembled shortblock? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-31-2004, 10:53 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I would really like to keep this all together. If the price were right then that would be a option. Pm me with any offers!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-31-2004, 10:54 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	76CC with 9:8.1 compression. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-30-2004, 11:42 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	SBC 406 450 hp For Sale!! I am buying a BBC project from a fellow Member so my fresh built never ran 406 must go. Specs are as follows. 2 bolt main 400 block machined .030 align bored and checked for run out fully clearanced Mag checked and pressure checked Hot tanked and Jet washed Bore torque plate honed to give true pistons walls Rods have been shotpeened Assmebly has been dynamic balanced file fit rings blue print clearance New cam bearings mains and freeze plugs Speed pro Hyperutectic Pistons 9.8 to 1 Race prepared nodular iron crank micropolished and wear sized and indexed. Childs and Albert moly file fit rings GM PINK RODS pioneer bolts Pete Jackson gear drive Lunati part # 0012lk cam with .550 lift at .050 3/8 Rocker studs with roller tipped rockers new push rods Fel pro gaskets 7 degree lock and lunati valve springs Gm cast heads that have been stage 3 ported and polished 2.02/1.60 s/s valves These heads flow very very well and the port work is awesome!! 76CC head. Have over $3000 invested Will take $2600 for it. Pm me for more info!! Engine was built by a builder in Virginia and has a great reputation. Here is a link to his website http://www.maxhorsepower.com/ Mark Lim is the builder. Call me at 502-376-9408 if needed. Eric Also includes performer Rpm intake. Rods are 5.7" forged gm. Will Ship!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 02-06-2004 at 09:12 PM.

02-01-2004, 07:45 PM	#7
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I will also pay meet halfway on shipping up to $400 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:31 PM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic#1 Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:31 PM	#9
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	3# Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:32 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:33 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic 5 Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:34 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Exhaust ports. Tried to get good pic of awesome port work. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 08:36 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Sorry about the crappy pics here!! The tape I had over the exhaust ports has left a sticky film that will come right off. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-02-2004, 09:55 PM	#14
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-03-2004, 01:02 AM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

02-03-2004, 07:13 PM	#16
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Are they 5.7" rods? Also, would you take a vehicle trade (Jeep Cherokee)? __________________ This is the project that never ends, yes it goes on and on my friend....

02-03-2004, 08:15 PM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	They are 5.7 rods. Also I would prefer to sell outright. But if the vehicle is something that would move quiclk I would consider it also. Pm me to talk further. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-04-2004, 11:05 PM	#18
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-05-2004, 12:37 AM	#19
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	I PMed you, but your mailbox was full. __________________ This is the project that never ends, yes it goes on and on my friend....

02-05-2004, 12:49 AM	#20
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	It is now emptied Sorry!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-05-2004, 03:10 AM	#21
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Hey, since your PM box was full, I emailed you...did you get that? If not, I can re-PM. __________________ This is the project that never ends, yes it goes on and on my friend....

02-05-2004, 10:15 PM	#22
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I will check or try sending to jegray@bellsouth.net __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-06-2004, 09:13 PM	#23
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-06-2004, 09:16 PM	#24
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Sent PM again __________________ This is the project that never ends, yes it goes on and on my friend....

02-06-2004, 09:20 PM	#25
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Got pics?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Register or Log In To remove these advertisements.