Front Cross Member in Vancouver or Washougal Area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 02-08-2004, 01:27 PM

Who wanted the front cross member in the Vancouver or Washougal area about 2 weeks ago? You emailed me and I cleaned out my mailbox. I will be going to Portland next weekend and could drop it off if you are still interested.

stllookn · 02-08-2004, 08:40 PM

ttt

Blue Beard · 02-08-2004, 11:03 PM

Don't know if it was me, but I been looking for a 5 bolt complete front end if the price is right.......

stllookn · 02-09-2004, 12:56 AM

I have a front end with missing lower control arms. The upper arm bushings are tight and have grease fittings so I am thinking it was rebuilt. What are your plans for this. Are you doing a stock 5 lug conversion and lowering your truck? After market lower arms give you a lower ride with more spring...cushier if that is what you are looking for. I have some stock springs, stock spindles and 5 lug rotors to go with this. The cross member is very nice with no rust, and all the shims and bolts go with.

02-08-2004, 01:27 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Front Cross Member in Vancouver or Washougal Area Who wanted the front cross member in the Vancouver or Washougal area about 2 weeks ago? You emailed me and I cleaned out my mailbox. I will be going to Portland next weekend and could drop it off if you are still interested. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

02-08-2004, 08:40 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	ttt __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

02-08-2004, 11:03 PM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Don't know if it was me, but I been looking for a 5 bolt complete front end if the price is right....... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-09-2004, 12:56 AM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I have a front end with missing lower control arms. The upper arm bushings are tight and have grease fittings so I am thinking it was rebuilt. What are your plans for this. Are you doing a stock 5 lug conversion and lowering your truck? After market lower arms give you a lower ride with more spring...cushier if that is what you are looking for. I have some stock springs, stock spindles and 5 lug rotors to go with this. The cross member is very nice with no rust, and all the shims and bolts go with. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.