Misc. stuff FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PR454SS · 02-11-2004, 02:53 PM

I' ve got some stuff I need to sell that came with my truck when I bought it, I'm not going to use any of this stuff, and am also unsure of prices, but it will be cheap!

PR454SS · 02-11-2004, 02:53 PM

2

PR454SS · 02-11-2004, 02:54 PM

3

This is the worst part of the trim set

PR454SS · 02-11-2004, 02:57 PM

4

PR454SS · 02-11-2004, 02:58 PM

5

**71swb4x4** · 02-11-2004, 03:13 PM

If the trim is off a shortbed I am interested.

Shawn

**71swb4x4** · 02-11-2004, 03:15 PM

If the condensor has the barckets I am interested in the brackets too.

Shawn

fatfords · 02-11-2004, 03:20 PM

I am looking for the stock air cleaner set up for a '72 350 with 4 barrel. Can't tell from pic 5 if that is two or four barrel and what all is there. Would you sell just the air cleaner and associated parts (if it is correct for me) and how much? Thanks!

724x4a/cchevy · 02-11-2004, 03:21 PM

Im interested in the heat shield in the first pic.

724x4a/cchevy · 02-11-2004, 03:23 PM

This is what im talking about. Thanks

PR454SS · 02-11-2004, 03:29 PM

Quote:

Originally posted by 71swb4x4
If the condensor has the barckets I am interested in the brackets too.

Shawn

I'm not sure where the condensor mounted originally so I don't know what a bracket looks like, but the trim is for a LB truck

PR454SS · 02-11-2004, 03:31 PM

Quote:

Originally posted by fatfords
I am looking for the stock air cleaner set up for a '72 350 with 4 barrel. Can't tell from pic 5 if that is two or four barrel and what all is there. Would you sell just the air cleaner and associated parts (if it is correct for me) and how much? Thanks!

sorry its a one barrel carb It was on a 307 so they must have taken it off a 6 cyl.

**71swb4x4** · 02-11-2004, 03:32 PM

Do you know if the condensor came off a small block originally?

Shawn

PR454SS · 02-11-2004, 03:32 PM

Quote:

Originally posted by 724x4a/cchevy
Im interested in the heat shield in the first pic.

I have NO clue as to what it is worth, any offer

HuggerCST · 02-11-2004, 05:11 PM

PM sent

Chevyguy111786 · 02-11-2004, 10:05 PM

I would be interested in the trim. How much? Is it top and bottom?

Chevyguy111786 · 02-11-2004, 10:05 PM

also, how much for shipping to 75044 and how close are you to Memphis, TN? Paragould Ark?

sparky69 · 02-11-2004, 11:05 PM

Where is the condensor at in the pic? I don't see it.
Or are you refering to the accumulator.

fast71 · 02-12-2004, 12:26 AM

I'm interrested in the upper trim . how much ??????

MR. GOODWRENCH · 02-12-2004, 02:11 AM

PM sent.

Chevyguy111786 · 02-12-2004, 02:30 AM

PM sent about trim

02-11-2004, 02:53 PM	#1
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Misc. stuff FS I' ve got some stuff I need to sell that came with my truck when I bought it, I'm not going to use any of this stuff, and am also unsure of prices, but it will be cheap! Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-11-2004, 02:53 PM	#2
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	2 2 Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-11-2004, 02:54 PM	#3
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	3 This is the worst part of the trim set Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-11-2004, 02:57 PM	#4
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	4 Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-11-2004, 02:58 PM	#5
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	5 Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-11-2004, 03:13 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	If the trim is off a shortbed I am interested. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-11-2004, 03:15 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	If the condensor has the barckets I am interested in the brackets too. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-11-2004, 03:20 PM	#8
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	I am looking for the stock air cleaner set up for a '72 350 with 4 barrel. Can't tell from pic 5 if that is two or four barrel and what all is there. Would you sell just the air cleaner and associated parts (if it is correct for me) and how much? Thanks! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

02-11-2004, 03:21 PM	#9
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Im interested in the heat shield in the first pic. __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

02-11-2004, 03:23 PM	#10
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	This is what im talking about. Thanks Attached Images

02-11-2004, 03:32 PM	#13
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Do you know if the condensor came off a small block originally? Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-11-2004, 05:11 PM	#15
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	PM sent __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-11-2004, 10:05 PM	#16
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	I would be interested in the trim. How much? Is it top and bottom?

02-11-2004, 11:05 PM	#18
sparky69 Registered User Join Date: Feb 2003 Location: Terre Haute, IN Posts: 94	Where is the condensor at in the pic? I don't see it. Or are you refering to the accumulator.

02-12-2004, 12:26 AM	#19
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	I'm interrested in the upper trim . how much ?????? __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100



Register or Log In To remove these advertisements.

02-12-2004, 02:11 AM	#20
MR. GOODWRENCH Registered User Join Date: Jan 2003 Location: Maryville,TN Posts: 402	PM sent. __________________ 68 CST SWB,full off frame restoration,72 GMC Sierra Grande SWB,72 Cheyenne 30 long wheelbase flatbed,2000 4door Chevy Dually bought new,2002 SS Camaro with 600 miles,bought it to put up,72 Monte Carlo,it was my first car,69 Impala with 50,000 miles,it was my dads,89 Dodge diseal 3/4 ton 4 wheel drive,my dad bought it new,68 Camaro RS dragcar,97 United Transporters 25 foot enclosed trailer,58 Oliver Super 77 Diseal,my grandfather bought new fully restored,55 Oliver Super 66 Diseal my uncle bought new,49 Oliver Rowcrop 88,51 Farmall H,51 Farmall Super C,81 Ford 3600,89 Ford 6610,49 Allis Chalmers WD45,81 Allis Chalmers 7060 my dad bought new,Allis Chalmers 175.

02-12-2004, 02:30 AM	#21
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	PM sent about trim

Register or Log In To remove these advertisements.