Brakeline Pics 4CB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PR454SS · 02-20-2004, 04:51 AM

I was unsure if you needed disc or drum so I got the differences between my 69 manual drum and my 2 72's power and manual disc.
Some are blurry but it was tough to get some pics

PR454SS · 02-20-2004, 04:52 AM

master cylinder on drum

PR454SS · 02-20-2004, 04:53 AM

same but power disc

PR454SS · 02-20-2004, 04:54 AM

same but manual disc/ proportioning valve hooks up the same as power disc

PR454SS · 02-20-2004, 04:56 AM

driver side frame rail on drum that the shock in the foreground

PR454SS · 02-20-2004, 04:59 AM

Driver side at control arm on both disc trucks

PR454SS · 02-20-2004, 05:01 AM

Passenger side coupling at about transmission, all trucks

PR454SS · 02-20-2004, 05:02 AM

drum brake rear axle coupling where flex hose attaches

PR454SS · 02-20-2004, 05:03 AM

drum brake rear line frame mount

PR454SS · 02-20-2004, 05:04 AM

Disc brake truck rear axle mount

PR454SS · 02-20-2004, 05:05 AM

Disc brake truck rear flex hose frame mount above axle

PR454SS · 02-20-2004, 05:08 AM

I hope those help a little, some are kinda lame but so am I that early in the morning LOL. Let me know if you need some more,

PR454SS · 02-20-2004, 02:54 PM

ttt

cb · 02-20-2004, 07:46 PM

Hey thanks for the pics, those really do help draw a picture of where they all run to. I found out yesterday that they messed up and shipped me lines for a 4x4. With the combination of your pictures and the correct lines, I think I'll be able to figure it out now. Thanks again, I'll be glad to return the favor if you need help down the road.

CB

cb · 02-20-2004, 10:10 PM

In this picture it looks like the hard brake line that runs down the passenger side of the frame ends behind the rear axle. Is that correct? Is this your SWB or LWB truck? In this area, are your 2 disk trucks the same?

Thanks

PR454SS · 02-21-2004, 05:41 AM

Thats correct and it is a shortbed, I'll check the longbed in the morning.

PR454SS · 02-21-2004, 07:42 PM

The longbed is different it attaches to the frame on the right side like my drum brake longbed

02-20-2004, 04:51 AM	#1
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Brakeline Pics 4CB I was unsure if you needed disc or drum so I got the differences between my 69 manual drum and my 2 72's power and manual disc. Some are blurry but it was tough to get some pics __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 04:52 AM	#2
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	master cylinder on drum Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 04:53 AM	#3
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	same but power disc Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 04:54 AM	#4
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	same but manual disc/ proportioning valve hooks up the same as power disc Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 04:56 AM	#5
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	driver side frame rail on drum that the shock in the foreground Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 04:59 AM	#6
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Driver side at control arm on both disc trucks Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:01 AM	#7
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Passenger side coupling at about transmission, all trucks Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:02 AM	#8
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	drum brake rear axle coupling where flex hose attaches Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:03 AM	#9
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	drum brake rear line frame mount Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:04 AM	#10
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Disc brake truck rear axle mount Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:05 AM	#11
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Disc brake truck rear flex hose frame mount above axle Attached Images __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 05:08 AM	#12
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	I hope those help a little, some are kinda lame but so am I that early in the morning LOL. Let me know if you need some more, __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 02:54 PM	#13
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	ttt __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-20-2004, 07:46 PM	#14
cb Registered User Join Date: Oct 2000 Location: Gilbert, AZ USA Posts: 98	Hey thanks for the pics, those really do help draw a picture of where they all run to. I found out yesterday that they messed up and shipped me lines for a 4x4. With the combination of your pictures and the correct lines, I think I'll be able to figure it out now. Thanks again, I'll be glad to return the favor if you need help down the road. CB __________________ Craig Berland

02-20-2004, 10:10 PM	#15
cb Registered User Join Date: Oct 2000 Location: Gilbert, AZ USA Posts: 98	SWB vs LWB In this picture it looks like the hard brake line that runs down the passenger side of the frame ends behind the rear axle. Is that correct? Is this your SWB or LWB truck? In this area, are your 2 disk trucks the same? Thanks Attached Images __________________ Craig Berland



Register or Log In To remove these advertisements.

02-21-2004, 05:41 AM	#16
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Thats correct and it is a shortbed, I'll check the longbed in the morning. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

02-21-2004, 07:42 PM	#17
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	The longbed is different it attaches to the frame on the right side like my drum brake longbed __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

Register or Log In To remove these advertisements.