fender emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazomatic · 03-13-2004, 10:38 PM

What is the easiest way to remove the fender emblems.

jhow66 · 03-13-2004, 11:26 PM

Take the fender off or 2cases of Coors and 2 preachers.

blazomatic · 03-13-2004, 11:36 PM

I was really hoping I wouldn't have to take the fender off. But oh well.

bouncytruck · 03-14-2004, 01:45 PM

If you remove the inner fenders, you can get to the backs of the emblems too. Less re-aligning than the whole fender...

blazomatic · 03-14-2004, 09:36 PM

Thanks I got them off. I took the doors off. I got a long boxed end wrench and got to them. It was a challange. But I didn't want to take the fenders off.

Davy · 03-15-2004, 04:50 PM

Quote:

Originally posted by blazomatic
I took the doors off.

Forgive the following "Monday Morning Quarterback":

I would have gone with the inner fenders like bouncy suggested. Unless your doors needed to come off anyway, you may have set yourself up for some agony. Doors are a ***** to get aligned and closing properly.

Go get some beer before you try putting them back on.

Davy

mister.freeze · 03-15-2004, 04:56 PM

beer is an important tool to have...

blazomatic · 03-16-2004, 09:04 PM

I tried that first. The first two bolts stripped out. So I removed the door. It did take a few minutes to get it to shut right. But If I had continued with the fender wells I think it would have taken me alot longer.

03-13-2004, 10:38 PM	#1
blazomatic Registered User Join Date: Jun 2003 Location: s.e. tenn Posts: 28	fender emblems What is the easiest way to remove the fender emblems.

03-13-2004, 11:26 PM	#2
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Take the fender off or 2cases of Coors and 2 preachers. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

03-14-2004, 01:45 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	If you remove the inner fenders, you can get to the backs of the emblems too. Less re-aligning than the whole fender... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-16-2004, 09:04 PM	#8
blazomatic Registered User Join Date: Jun 2003 Location: s.e. tenn Posts: 28	inner fender wells I tried that first. The first two bolts stripped out. So I removed the door. It did take a few minutes to get it to shut right. But If I had continued with the fender wells I think it would have taken me alot longer.

03-13-2004, 11:36 PM	#3
blazomatic Registered User Join Date: Jun 2003 Location: s.e. tenn Posts: 28	I was really hoping I wouldn't have to take the fender off. But oh well.

03-14-2004, 09:36 PM	#5
blazomatic Registered User Join Date: Jun 2003 Location: s.e. tenn Posts: 28	Thanks I got them off. I took the doors off. I got a long boxed end wrench and got to them. It was a challange. But I didn't want to take the fenders off.

03-15-2004, 04:56 PM	#7
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	beer is an important tool to have...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.