Needed: Top of Windshield Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 03-14-2004, 08:29 AM

I need to replace the top portion of my windshield frame

I just need the top rail to include the corners and just a couple inches of the sides...that's all. (this should be a peach to find)
Needs to be rust free of coarse...I know

Anybody seperate one recently? Trades welcome, thanks.
I better include that it's for a blazer

vtblazer · 03-19-2004, 07:26 AM

Running it up again...it's a long shot I know but here's to hoping some has one

bad_turbo · 03-19-2004, 04:11 PM

can't a good machine shop make one for you?

70 Jimmy · 03-19-2004, 06:13 PM

It's a pretty complex combination of sheet metal pieces. I doubt a shop would want to deal with it. Keep searching. I've found a couple. You may want to try www.coloradok5.com and ask on those message boards. Good Luck.

bouncytruck · 03-19-2004, 08:06 PM

They pop up every now and then. Just keep searching...

vtblazer · 03-19-2004, 08:52 PM

Yeah, I expect timing is everything

I just sectioned a firewall from a truck and have it sitting nicely on my blazer tub. Could make something work up top but if I can find an original blazer frame, I think that's the way to go.
Keep your eyes open for me, that's all I'm asking, thanks

bouncytruck · 03-19-2004, 09:19 PM

There is a board member who fabricated their own top to the windshield frame. He didn't plan on ever putting the top back on, just a soft top, so he just used flat metal.

JimKshortstep4x4 · 03-19-2004, 09:21 PM

If it does not rain tomorrow, I will be looking at one. I will let you know of it is useable or not.

Jim

*Gee_Emm* · 03-19-2004, 09:26 PM

I have a whole front of a Blazer with a *perfect* frame. Although I havent figured out to ship something that big yet.

*Gee_Emm* · 03-20-2004, 01:12 PM

*Gee_Emm* · 03-20-2004, 01:19 PM

*Gee_Emm* · 03-20-2004, 01:21 PM

:p

vtblazer · 03-23-2004, 09:41 AM

Thanks for the offer Gee, I found one within driving distance.

03-14-2004, 08:29 AM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Needed: Top of Windshield Frame I need to replace the top portion of my windshield frame I just need the top rail to include the corners and just a couple inches of the sides...that's all. (this should be a peach to find) Needs to be rust free of coarse...I know Anybody seperate one recently? Trades welcome, thanks. I better include that it's for a blazer Last edited by vtblazer; 03-14-2004 at 08:31 AM.

03-19-2004, 07:26 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	TTT Running it up again...it's a long shot I know but here's to hoping some has one

03-19-2004, 04:11 PM	#3
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	can't a good machine shop make one for you? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

03-19-2004, 06:13 PM	#4
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	It's a pretty complex combination of sheet metal pieces. I doubt a shop would want to deal with it. Keep searching. I've found a couple. You may want to try www.coloradok5.com and ask on those message boards. Good Luck. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-19-2004, 08:06 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	They pop up every now and then. Just keep searching... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-19-2004, 08:52 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Hanging in There Yeah, I expect timing is everything I just sectioned a firewall from a truck and have it sitting nicely on my blazer tub. Could make something work up top but if I can find an original blazer frame, I think that's the way to go. Keep your eyes open for me, that's all I'm asking, thanks

03-19-2004, 09:19 PM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	There is a board member who fabricated their own top to the windshield frame. He didn't plan on ever putting the top back on, just a soft top, so he just used flat metal. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-19-2004, 09:21 PM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If it does not rain tomorrow, I will be looking at one. I will let you know of it is useable or not. Jim

03-19-2004, 09:26 PM	#9
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I have a whole front of a Blazer with a perfect frame. Although I havent figured out to ship something that big yet.

03-20-2004, 01:12 PM	#10
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991

03-20-2004, 01:19 PM	#11
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991

03-20-2004, 01:21 PM	#12
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	:p

03-23-2004, 09:41 AM	#13
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Frame Thanks for the offer Gee, I found one within driving distance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.