Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-28-2004, 10:06 PM | #1 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,051
|
Is it Possible to Lift a 2wd 3/4 TON ?
Oky I love the look of as slammed truck and I am building a 67 Shorty to fill that need, but I own a Roofing company and I need a work truck that can haul shingles and junk. I was able to get a 84 2WD 3/4 Ton cheep . So If I have to drive somthing I would like it to look and sound tough. So how would I go about lifting the front ? The back is easy I have that figured out already. Any Ideas ? The front sits really low it need to get out of the weeds.
Thanks guy's
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD |
03-29-2004, 12:38 AM | #2 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
first off the coils are probably sagging, you could get a set of lift coils and/or install some coil spring spacers. Due to the geometery of the front suspension, a 3/4 inch spacer will give you close to 3" of lift. what size tire are you wanting to run? i run a 32" on stock 1/2 ton.
here is a recent thread with all relavant information. if you have any more questions feel free to ask. http://67-72chevytrucks.com/vboard/s...hlight=fabtech
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
03-29-2004, 01:54 AM | #3 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,051
|
Cool Thanks
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD |
03-29-2004, 02:12 AM | #4 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,051
|
I was thinking of a 31 or 32 tire. Not too sure yet. I have to see how High I can get it.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD |
04-01-2004, 01:45 AM | #5 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
you wont have any clearance issues with 31 or 32" tires at stock height. they fill the fenderwells quite well.
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
Bookmarks |
|
|