WTB: Dana 20 Tcase - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XJGPER · 04-02-2004, 08:34 PM

Hey folks,

I'm looking for a D20 to replace the badly worn one i have.. The cheaper the better. Must have 10 spline input like the one that mates to the sm465.

Thanks!

Dave

drink2mny · 04-02-2004, 09:06 PM

Where are you located??
I have a dana 20 that came off a t350..
Worked well when in the truck.

orangeuavol · 04-02-2004, 11:29 PM

I have one coupled to a 3-speed that I just pulled from my blazer. I'll look at the input shaft and see if its a 10 spline.

XJGPER · 04-03-2004, 08:39 AM

Sorry guys, forgot to post... I'm in Post Falls ID. not just a wink away from spokane....

drink2mny · 04-03-2004, 12:57 PM

Well We actually have 2. one off a jeep tranny and one off the t350.Not sure if they will work for ya, but worth a shot..
They are both at Blackbird's in Spokane.
Feel free to give him a call 509-534-5219
or email him from the website in my signature.
Tell him I sent ya from the board, and I'll also give him a call

XJGPER · 04-03-2004, 06:20 PM

drink2mny-

Thanks, but those will not work.. the Jeep on has the wrong input and the auto will have the fine spline input.. Thanks Again!

Dave

drink2mny · 04-03-2004, 07:57 PM

Well it was worth a shot, being so close to you

We'll probably have them until the Spokane Swapmeet. I have a booth there for the past 3years.
The only bad part is. It's during the same weekend as the Hot Rod Cafe show..
I have Randy on the look out. If we come across one before you get one, I'll give you a holler..

04-02-2004, 08:34 PM	#1
XJGPER Registered User Join Date: Apr 2004 Posts: 3	WTB: Dana 20 Tcase Hey folks, I'm looking for a D20 to replace the badly worn one i have.. The cheaper the better. Must have 10 spline input like the one that mates to the sm465. Thanks! Dave

04-02-2004, 09:06 PM	#2
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Where are you located?? I have a dana 20 that came off a t350.. Worked well when in the truck. __________________ Support The Board

04-02-2004, 11:29 PM	#3
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 724	I have one coupled to a 3-speed that I just pulled from my blazer. I'll look at the input shaft and see if its a 10 spline. __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

04-03-2004, 12:57 PM	#5
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Well We actually have 2. one off a jeep tranny and one off the t350.Not sure if they will work for ya, but worth a shot.. They are both at Blackbird's in Spokane. Feel free to give him a call 509-534-5219 or email him from the website in my signature. Tell him I sent ya from the board, and I'll also give him a call __________________ Support The Board

04-03-2004, 07:57 PM	#7
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Well it was worth a shot, being so close to you We'll probably have them until the Spokane Swapmeet. I have a booth there for the past 3years. The only bad part is. It's during the same weekend as the Hot Rod Cafe show.. I have Randy on the look out. If we come across one before you get one, I'll give you a holler.. __________________ Support The Board

04-03-2004, 08:39 AM	#4
XJGPER Registered User Join Date: Apr 2004 Posts: 3	Sorry guys, forgot to post... I'm in Post Falls ID. not just a wink away from spokane....

04-03-2004, 06:20 PM	#6
XJGPER Registered User Join Date: Apr 2004 Posts: 3	drink2mny- Thanks, but those will not work.. the Jeep on has the wrong input and the auto will have the fine spline input.. Thanks Again! Dave



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.