![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2005
Location: nc
Posts: 118
|
Transfer case leak??
Got a 85 Silverado 4X4 that loses its tranny fluid and stops pulling but if you let it sit a while and check majority of the fluid is back and it will pull again. What are some things to look for as far as with the transfer case? Is there a way to tell if it is forcing the fluid into the transfer case? Is there an overflow tube because I am getting quite a bit of fluid coating the underside but can't pinpoint the leak. It is definitely not the trans front seal.... Thanks for the help!
Jeremy |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Transfer case leak??
I have heard of a leak source being the speedo cable input..duno if that is your issue but thought I would mention it anyway...
![]() Maybe you have the transfer case that runs on tranny fluid?
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks ![]() Last edited by Burt4x4; 10-18-2007 at 10:45 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2005
Location: nc
Posts: 118
|
Re: Transfer case leak??
I am pretty sure the transfer case is the NP203 which uses tranny fluid. I am just thinking maybe the rear trans seal is gone and it is forcing the fluid into the transfer case but I have no way of checking that.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Transfer case leak??
Sorry, I don't know anything about auto trannys or NP203s..other than they are chain drivin.
Hey at least my comments are keeping your post to the top for others to read ![]()
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2005
Location: nc
Posts: 118
|
Re: Transfer case leak??
Sorry....seems it is a NP208....misread the tag. Does it seem realistic that my transmission might still be spared if I figure out it is just the rear seal and the transfer case is overfull? Once it loses enough fluid that it quits pulling I shut it off.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|