Interest in 6 cyl. parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**uncle** · 09-08-2005, 09:39 PM

I have a 6cyl that's about to go to scrap. Just wanted to know if anyone needs any parts. No p.s. or air, or pulleys.

68 short step · 09-08-2005, 09:51 PM

do you have the 'elbow' that the thermostat houseing mounts to? the piece that actually bolts to head.

**uncle** · 09-08-2005, 09:53 PM

I'll check tomorrow, but I'm pretty sure it's there.

68 short step · 09-08-2005, 09:59 PM

is it free plus shipping?

Jakes-66-K10 · 09-09-2005, 12:56 AM

V6 or I6?

shifty · 09-09-2005, 01:20 AM

If it's functioning, i'll take it. I got two other ones sitting on my floor right now. Can you give me a PM? I can come pick it up, I live in town by the capitol building.

**uncle** · 09-09-2005, 03:21 PM

Elbow is there has sending unit init( CORRECT?). $5 plus shipping, but no more than $10 total, l6 for votex, and I don't know the running condition, but does turn over. I have removed intake and exhaust already.

68 short step · 09-09-2005, 05:13 PM

yea thats correct.ill take it. for no more that 10$ shipped (that is what you are saying, right?)pm me.thanks

**uncle** · 09-09-2005, 09:22 PM

Shifty just picked up the engine. Thanks for the response.

shifty · 09-09-2005, 11:17 PM

Guys, I've got the engine. 68shortstep, I've not only got the one currently on the engine, I've also got a spare that I've cleaned up. Are you talking about the thermostat housing or the ball-shaped thing that connects to the radiator hose on the other side of the thermostat?

Shoot me a PM. I promised uncle I'd take care of it for you.

ndamerau · 09-10-2005, 09:35 PM

I am looking for a stock 250 6 cyl air cleaner top (mine has been goobered) and heat riser tube (missing in action) for my 69 C-10. I am also looking for a clutch pull rod and 3 speed shift linkages (really need the 1st/reverse). Might you have any of these items? What the heck, what shape are the intake/exhaust manifolds in? It might be good to have some good spares.

Thanks.

**uncle** · 09-11-2005, 12:08 AM

I'll check on Monday to see if I have any of those. This Sub was an automatic.

**uncle** · 09-12-2005, 09:00 PM

Looked today, no luck. I have a few more places I'll check tomorrow. You can check with Shifty about the intake and exhaust, because he got those when he picked up the engine.

**uncle** · 09-13-2005, 07:12 PM

I have the breather top, bottom and piece that goes to valve cover. $20 + shipping.

Blue_71 · 09-13-2005, 08:30 PM

if yall dont mind me chiming in, i have two good intake/exhaust manifolds for a 250 6 cyl

Huck · 09-14-2005, 07:25 AM

Ain't it amazin how popular 6 bangers get when the price of gas goes up!! All you need is a nice tight one hooked up to a 700R4 and some 308 gears---then hit your right foot with a big hammer so it swells up three times it's normal size and you will probably get 25mpg!hehehehehe

ndamerau · 09-15-2005, 10:30 AM

I assume that "the piece that goes to the valve cover" is the metal spacer with the rubber hose and metal elbow that fits in the valve cover? I really need the metal heat riser tube and air cleaner top. Thanks for looking. I will see if I can get both pieces in one deal, since shipping on parts from two sources will cost as much as the parts themselves.

Thanks again.

09-08-2005, 09:39 PM	#1
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Interest in 6 cyl. parts I have a 6cyl that's about to go to scrap. Just wanted to know if anyone needs any parts. No p.s. or air, or pulleys.

09-08-2005, 09:53 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Elbow I'll check tomorrow, but I'm pretty sure it's there.

09-09-2005, 01:20 AM	#6
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	If it's functioning, i'll take it. I got two other ones sitting on my floor right now. Can you give me a PM? I can come pick it up, I live in town by the capitol building. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 09-09-2005 at 01:20 AM.

09-09-2005, 03:21 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	6 Parts Elbow is there has sending unit init( CORRECT?). $5 plus shipping, but no more than $10 total, l6 for votex, and I don't know the running condition, but does turn over. I have removed intake and exhaust already. Last edited by uncle; 09-09-2005 at 03:54 PM.

09-09-2005, 09:22 PM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Engine Shifty just picked up the engine. Thanks for the response.

09-08-2005, 09:51 PM	#2
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	do you have the 'elbow' that the thermostat houseing mounts to? the piece that actually bolts to head.

09-08-2005, 09:59 PM	#4
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	is it free plus shipping?

09-09-2005, 12:56 AM	#5
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	V6 or I6?

09-09-2005, 05:13 PM	#8
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	yea thats correct.ill take it. for no more that 10$ shipped (that is what you are saying, right?)pm me.thanks

09-09-2005, 11:17 PM	#10
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Guys, I've got the engine. 68shortstep, I've not only got the one currently on the engine, I've also got a spare that I've cleaned up. Are you talking about the thermostat housing or the ball-shaped thing that connects to the radiator hose on the other side of the thermostat? Shoot me a PM. I promised uncle I'd take care of it for you. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

09-10-2005, 09:35 PM	#11
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	I am looking for a stock 250 6 cyl air cleaner top (mine has been goobered) and heat riser tube (missing in action) for my 69 C-10. I am also looking for a clutch pull rod and 3 speed shift linkages (really need the 1st/reverse). Might you have any of these items? What the heck, what shape are the intake/exhaust manifolds in? It might be good to have some good spares. Thanks.

09-11-2005, 12:08 AM	#12
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Parts I'll check on Monday to see if I have any of those. This Sub was an automatic.

09-12-2005, 09:00 PM	#13
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Top Looked today, no luck. I have a few more places I'll check tomorrow. You can check with Shifty about the intake and exhaust, because he got those when he picked up the engine.

09-13-2005, 07:12 PM	#14
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Breather I have the breather top, bottom and piece that goes to valve cover. $20 + shipping.

09-14-2005, 07:25 AM	#16
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Ain't it amazin how popular 6 bangers get when the price of gas goes up!! All you need is a nice tight one hooked up to a 700R4 and some 308 gears---then hit your right foot with a big hammer so it swells up three times it's normal size and you will probably get 25mpg!hehehehehe



Register or Log In To remove these advertisements.

09-15-2005, 10:30 AM	#17
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	I assume that "the piece that goes to the valve cover" is the metal spacer with the rubber hose and metal elbow that fits in the valve cover? I really need the metal heat riser tube and air cleaner top. Thanks for looking. I will see if I can get both pieces in one deal, since shipping on parts from two sources will cost as much as the parts themselves. Thanks again.

Register or Log In To remove these advertisements.